Chemistry / Kimya
Permanent URI for this collectionhttps://hdl.handle.net/11147/4072
Browse
4 results
Search Results
Article Citation - WoS: 30Citation - Scopus: 30Glycidyl-Methacry Late-Based Electrospun Mats and Catalytic Silver Nanoparticles(John Wiley and Sons Inc., 2008) Demir, Mustafa Muammer; Uğur, Gökçe; Gülgün, Mehmet A.; Menceloğlu, Yusuf Z.P(AN-GMA) and PGMA fibers coated with monodisperse silver nanoparticles have been prepared by a combination of electrospinning and electroless plating. The morphology of the electrospun fibers remains unchanged after surface hydrazination. Oxidation of hydrazine in an ammoniacal solution of AgNO 3 reduces and deposits silver atoms along the fiber surface, which then coalesce to Ag particles. The size of the silver nanoparticles is varied between 20-60 nm. Since the density of the active sites for silver reduction is lower in P(AN-GMA), a smaller particle size could be obtained. The catalytic activity of the silver nanoparticles has been confirmed.Article Citation - WoS: 15Aggregation of Fillers Blended Into Random Elastomeric Networks: Theory and Comparison With Experiments(John Wiley and Sons Inc., 2006) Demir, Mustafa Muammer; Menceloğlu, Yusuf Ziya; Erman, BurakA theoretical model describing aggregation of filler particles in amorphous elastomers is proposed. The model is based on a counting technique originally used in genome analysis to characterize the size and distribution of overlapping segments randomly placed on a DNA molecule. In the present model, the particles are first assumed to aggregate randomly upon mixing into the elastomer and then-sizes are calculated. The sizes and distributions of aggregates are also studied in the presence of attractive interparticle forces. Results of the proposed model are compared with experimental data on silica-filled end-linked poly(dimethyl-siloxane) networks. Comparison of the theory and experiment shows that the random aggregation assumption where no attractive forces exist between the particles is not valid and a significant attraction between the silica particles is needed in the theory to justify the experimental data obtained using atomic force microscopy. For filler content below 1.45 vol.-%, the model agrees, qualitatively, with experiment and shows the increase in cluster size with increasing amount of filler. It also explains the increase in the dispersion of aggregate sizes with increasing amount of filler.Article Citation - WoS: 20Citation - Scopus: 23Rhodamine-Immobilised Electrospun Chitosan Nanofibrous Material as a Fluorescence Turn-On Hg2+ Sensor(John Wiley and Sons Inc., 2016) Horzum, Nesrin; Mete, Derya; Karakuş, Erman; Üçüncü, Muhammed; Emrullahoğlu, Mustafa; Demir, Mustafa MuammerA turn-on fluorescence sensing system for mercuric (Hg2+) ions relying on a modified rhodamine B–chitosan fluorophore moiety was developed. This novel sensing approach relies on the simultaneous electrospinning of chitosan and rhodamine B hydrazide with phenylisothiocyanate functionality in hexafluoroisopropanol solution at 3.4 kV cm−1. The electrospun mats exhibited not only considerably enhanced fluorescence intensity in the presence of mercury ions, a result attributed to the ring opening of the spirolactam unit of the rhodamine-based fluorophore, but also a remarkably high sensitivity and selectivity toward Hg2+. In effect, the strategy has the potential to open new avenues in the design and development of other high-performance nanofibrous sensing materials for detecting target metal species of environmental interest.Article Citation - WoS: 49Citation - Scopus: 51Voc Sensors Based on a Metal Oxide Nanofibrous Membrane/Qcm System Prepared by Electrospinning(Royal Society of Chemistry, 2014) Horzum Polat, Nesrin; Taşçıoğlu, Didem; Özbek, Cebrail; Okur, Salih; Demir, Mustafa MuammerWe report a simple synthetic route to fabricate crystalline ZnO and CeO2/ZnO nanofibrous mats and their sensing characteristics against volatile organic compounds (VOCs) such as benzene, propanol, ethanol, and dichloromethane. Precursor fibers were fabricated by electrospinning of poly(vinyl alcohol) and metal salt(s) at 2.5 kV cm-1 in aqueous solution. The fibers were directly deposited on the crystal surface of a quartz crystal microbalance (QCM). The crystal, which was coated by nanostructured PVA/metal precursor(s) fibers, was subjected to calcination in air at 500 °C for 5 h. The formation of an oxide based nanofiber mat was revealed by scanning electron microscopy and X-ray diffraction. Upon exposure of the nanofiber mats to the VOCs, the compounds adsorbed onto the surface of oxidic fibers. The physisorption of the compounds was confirmed by FTIR and QCM. Both systems showed sensitivity to the VOCs and they hold a broad promise particularly for sensing applications of volatile alcoholic compounds. The introduction of CeO2 into the ZnO structure reduced the sensitivity of ZnO most probably due to the decrement of oxygen vacancies.