Chemistry / Kimya
Permanent URI for this collectionhttps://hdl.handle.net/11147/4072
Browse
31 results
Search Results
Article Citation - WoS: 2Citation - Scopus: 3A Phenomenological Kinetic Flotation Model: Distinct Time-Variant Floatability Distributions for the Pulp and Froth Materials(Elsevier, 2023) Polat, Mehmet; Polat, HürriyetA simple and easy-to-use phenomenological kinetic flotation model, strongly connected with the physics of the process, is proposed in this paper. The model explicitly contains the cell volume, aeration rate, volumetric holdup, mean bubble size, and particle density as input variables. It can be employed to characterize the floatability distributions of the particles in the pulp and the froth separately any time during the flotation process. Two new time-dependent kinetic parameters, the bubble loading factor & phi;(t) and the maximum cell mass transfer capacity Mmax(t) also appear in the model expression. & phi;(t) is a measure of the degree of crowding of the bubble surfaces and accounts for the deviations from the first-order rate equation. Mmax(t) describes the maximum amount of mass that can be transported to the froth phase by the bubble population in the cell. Screen fractionation of each froth product collected at different time intervals during a single kinetic flotation test is sufficient to generate the data required by the model for analysis. Application of the model to this data yields directly time-dependent functions for the floatability of the particles reporting to froth Kf(t) or remaining in the cell Kp(t) for each size fraction separately, without the need for any empirical parameters. The test of the model was carried out using published kinetic flotation data from the literature.Book Part Citation - Scopus: 3Tissue Engineering Applications of Marine-Based Materials(Springer, 2022) Polat, Hürriyet; Zeybek, Nuket; Polat, MehmetTissue engineering is a promising approach in replacing or improving tissues lost or has become nonviable due to disease or trauma by the use of scaffold materials by combining engineering and biochemical/physicochemical methods. Its purpose is to create suitable matrices that support cell differentiation and proliferation toward the formation of new and functional tissue. Marine-based natural compounds are potential scaffold feedstock material in tissue engineering owing to their biocompatibility and biodegradability while providing excellent biochemical/physicochemical properties. Numerous application areas and various fabrication routes techniques described in the literature attest to the importance of these materials in tissue regeneration. This review has been carried to merge the information from a large number of studies on the marine-based scaffold materials in tissue engineering into a coherent summary. © The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2022.Research Project Uçucu kül ve doğal zeolitin beraber kullanılarak borun atık sulardan uzaklaştırılması(2008) Polat, Hürriyet; Polat, Mehmet; Şekeroğlu, KorayBu proje kapsamında, Yeniköy, Kemerköy, Soma ve Yatağan termik santrallerinden alınan uçucu küllerin, sıcaklık, katı / sıvı oranı ve başlangıç konsantrasyonu gibi parametler kullanılarak bor adsorpsiyon kapasiteleri incelenmiştir. Bor adsorpsiyon deneyleri laboratuvarda hazırlanan simültane sular (10, 25, 50, 100 ve 300 ppm Bor) ve Kızıldere (Denizli) jeotermal tesislerinden (25-30 ppm Bor) alınan borlu sularla yapılmıştır. Yapılan “batch” deneylere dayanarak, uçucu küllerin boru adsopladığı ve özellikle yüzey alanı en geniş olan Yeniköy külü yeterli zaman ve yüzey alanı sağlandığında %99 ‘a varan adsorpsiyon miktarına ulaştığı gözlenmiştir. Tüm küllerin deney sonuçları tek katmanlı adsorpsiyonu belirten “Langmuir” izotermine ve Kaydırılmış İkinci Mertebe parametresine daha uygun olduğu tespit edilmiştir. Yapılan sıcaklık çalışmalarında, Yeniköy ve Kemerköy külleriyle 25o C, 45o C ve 65o C koşullarında yapılan deneylerin verileri kullanılarak, o ΔH ,o ΔG , o ΔS değerleri hesaplanmıştır. Sıcaklıkla azalan adsorpsiyon kapasitesi ve negatif o ΔH değerleri, ekzotermik adsorpsiyon olduğunu belirtmektedir. Aynı zamanda -40,0 kJ / mol’ün altında çıkan (-52,89 ve -48,55 kJ / mol) entalpi ( o ΔH ) değerleri kimyasal adsorpsiyon olduğunu belirtmektedir. Soma ve Yatağan külleri için de Langmuir izotermlerinin uygun olması kimyasal bir adsorpsiyon olduğunu önermektedir.Article Citation - WoS: 8Citation - Scopus: 11The Effect of Protein Bsa on the Stability of Lipophilic Drug (docetaxel)-Loaded Polymeric Micelles(Elsevier, 2021) Polat, Hürriyet; Çevik Eren, Merve; Polat, MehmetPolymeric micelles are promising delivery vehicles for improving the efficacy of anticancer drugs and reducing their side effects. However, considering the binding ability of serum albumin, the possible interaction of micelles with the native plasma components in the bloodstream raises serious questions on micellar stability. The stability of barren or drug-loaded copolymeric micelles was investigated systematically in distilled water (DW) and simulated body fluid (SBF) solutions in the presence of a model protein. The copolymer was a Pluronic® series triblock copolymer (P-123), the drug was strongly lipophilic docetaxel (DOC) and the protein was Bovine Serum Albumin (BSA). The effect of such factors as BSA and DOC concentrations and the aging of the micellar solutions was studied. Both the barren and drug-loaded micelles were quite stable in blank DW and SBF solutions for long times up to 10 days. They lost integrity and showed no inclination to re-assemble when the BSA concentration reached a critical value, which was very close to the plasma Human Serum Albumin (HSA) concentration. The presence of DOC in the micellar cores could not prevent disintegration. The results illustrate clearly that ensuring the stability of polymeric micelles in blood plasma should be an important design factor in their use as drug carriers.Article Toz Kömürlerin Zenginleştirilmesinde Yağ Aglomerasyonu Yöntemi ve Yenilikler(İstanbul Üniversitesi, 2010) Kılınç Aksay, Ece; Arslan, Vedat; Polat, HürriyetKömürün üretim teknolojisindeki gelişmeler, kömür üretimi sürecinde oluşan ince boyutlu (toz) kömürün miktarını arttırmaktadır. Bu tür toz kömürlerin zenginleştirilerek değerlendirilmesi, hem madencilik maliyetini azaltmakta, hem de önemli bir çevre problemini ortadan kaldırmaktadır. Ayrıca eneıjiye olan gereksinim, her geçen gün teknolojinin ilerlemesiyle doğru orantılı olarak artmaktadır. Dolayısıyla, çevre problemi yaratan sınırlı enerji kaynaklarının, çevre dostu yöntemlerle değerlendirilmesi gerekmektedir. Yağ aglomerasyonu yöntemi, bu yöntemlerden biridir. Özellikle çok ince boyutlu kömür tanelerinin kazanılmasında flotasyona alternatif bir yöntemdir. Bu yöntem, yüksek devirli karıştırıcılar kullanılarak, kömür tanelerinin yağ tarafından ıslatılması ve birbirlerine bağlanarak iri taneler haline getirilmesi prensibine dayanır. Yağın, kömür-su sistemine verilmeden önce, su içerisinde gerek mekanik karıştırma ile gerekse çeşitli yüzey aktif reaktiflerin kullanımı ile emülsiye edilmesi (dağıtılması) veya kömür yüzeyinin yine çeşitli yüzey aktif reaktiflerle hava/yağ sever özellik kazandırılması, yöntemin başarısını hem teknik hem de ekonomik yönden arttırmaktadır. Yağ aglomerasyonu yöntemindeki bu yenilikler, günümüzde linyit gibi düşük kaliteli kömürlerin bile, bu yöntem ile başarıyla zenginleştirilebilmesine olanak sağlamaktadır. Bu makalede, yağ aglomerasyonu yönteminin temel prensipleri, yöntemi etkileyen parametreler ve farklı tip kömürler için yöntemin uygulamasına yönelik araştırmalar detaylı olarak açıklanmış, yöntem ile ilgili yenilikler tartışılmıştır.Article Solunabilir Tozun Su Spreyleri Kullanılarak Bastırılmasında Son Gelişmeler(2000) Polat, Hürriyet; Polat, Mehmet; Gürgen, SabitTürkiye'de görülen meslek hastalıklarının çoğunu tozun solunmasından kaynaklanan pnömokonyoz oluşturmaktadır. Bu yazının amacı, yeraltı ocaklarında işçi sağlığı açısından sakıncalı olan havada asılı tozların, su spreyleri kullanılarak bastırılması konusunda gelinen aşamayı sunmaktır. Bu amaçla, havada asılı toz ve su damlalarıyla yapılan detaylı çalışmalar ışığında, sprey suyuna katılan yüzey aktif maddelerin istenen verim artışını sağlayamama nedenleri ele alınmakta ve su spreylerinin Türkiye'deki maden ocaklarında kullanım olanakları tartışılmaktadır.Conference Object Effect of Some Physical, and Chemical Variables on Flocculation and Sediment Behaviour(A.A. Balkema Publishers, 2000) Polat, Hürriyet; Polat, Mehmet; İpekoğlu, ÜnerEffect of some chemical and physical variables on the settling rate, final sediment height, sediment viscosity and supernatant turbidity of a clay sample was studied using various polyacrylamide type flocculants. Increasing flocculant concentration significantly increased both the settling rate and sediment viscosity. More importantly, changes in the final sediment, height, hence the packing density, was minimal for all the conditions tested once the sediment was allowed to consolidate. Also, the mode of addition of the polymer, at once or continuous, did not seem to affect any of the parameters measured. Conditioning time seemed to alter the settling rate at low polymer concentrations, but had no effect at high polymer concentrations. However, increasing the conditioning time caused a decrease in the sediment viscosity. Different types of the polyacrylimides generated different settling rates at a given concentration, but the final sediment height was nearly independent of polymer type.Conference Object Use of Ion Flotation To Remove Copper From Waste Waters(2006) Erdoğan, Demet; Polat, Hürriyet; İpekoğlu, ÜnerFlotation studies were carried out to investigate the removal of copper from wastewaters. Various parameters such as pH, surfactant and frother concentrations and airflow rate were tested to determine the optimum flotation conditions. Sodium dodecyl sulfate and Hexadecyltrimethyl ammonium bromide were used as collectors. Recoveries as high as 90% could be to obtained under optimum conditions.Book Part Citation - Scopus: 6Recent Advances in Chitosan-Based Systems for Delivery of Anticancer Drugs(Springer, 2020) Polat, Mehmet; Polat, HürriyetProblems in transporting drug molecules to tumor sites in required dose or constitution lead to low efficacy and significant side effects. Shielding the drug molecules in micelles, liposomes, or nanoparticles is a major line of investigation to improve chemotherapeutic treatment. Though compatibility for proper envelopment of the drug and timely release at the tumor site are required of such a carrier, protecting its own physicochemical and morphological integrity during transport is another precondition. Because of its superior polymerization capability, biocompatibility, pH dependence, and charging characteristics, chitosan has been in the forefront of potential drug carriers. Numerous synthesis routes for chitosan-based nanocarriers have been suggested to the extent that a search of the literature published since 2000 with the keywords “novel + nano + chitosan” in the title results in 527 articles, indicating the bewildering quality and quantity of the new information. This review was carried out not only to peruse this large amount of work on chitosan-based anticancer drug delivery but also to extract manageable patterns from numerous synthesis routes. The main conclusion is that the synthesis methods suggested in literature can be combined into two main routes, and the degree of hydrophobicity of the drug determines which route should be followed. © Springer Nature Singapore Pte Ltd. 2019.Article Citation - WoS: 2Reduction of Carbon Dioxide During the Synthesis of Metal Nano-Particles in Water(Elsevier Ltd., 2003) Polat, Hürriyet; Cohen, H; Meyerstein, D; Rusonik, I.An effort was made to synthesize "carbon-free" metal (Fe-0, Co-0, Ni-0) nano-particles via the reduction of their salts with BH4- in aqueous solutions. Surprisingly it was found that when the synthesis is carried out in the presence of CO2, e.g., in aerated solutions, the CO2 is catalytically reduced by BH(4)(-)on the surface of the metal particles. Carbon-free metals can be prepared by reduction under an inert atmosphere. Thus metal surfaces might have acted as catalysts for CO2 fixation, probably via the initial formation of carbon clusters, in the reductive atmosphere in the prebiotic era. (C) 2003 Elsevier B.V. All rights reserved.