Chemistry / Kimya

Permanent URI for this collectionhttps://hdl.handle.net/11147/4072

Browse

Search Results

Now showing 1 - 10 of 11
  • Article
    Fourier Dönüşümlü Kızılötesi (ft-ır) Spektroskopisi ile Malassezia Türlerinin Değerlendirilmesi
    (Ankara Microbiology Society, 2011) Ergin, Çağrı; Vuran, M. Emre; Gök, Yaşar; Özdemir, Durmuş; Karaarslan, Aydın; Kaleli, İlknur; Çon, Ahmet Hilmi
    Malassezia türleri, normal deri florasının üyesi kabul edilen, cilt enfeksiyonlarına da yol açabilen lipofilik ekzobasidiyomiçet mantarlardır. Rutin mikrobiyoloji laboratuvarlarında uygulanan fenotipik karakterlere dayalı tür tanımlaması her zaman için taksonomik araştırmalarla uyumlu olmayabilmektedir. Lipofilik ve lipide bağımlı Malassezia türleri lipid ile zenginleştirilmiş besiyerlerine gereksinim gösterir. Bu nedenle, lipid bölgesine odaklanmış Fourier dönüşümlü kızılötesi (Fourier transform infrared; FT-IR) spektroskopisi, Malassezia türlerinin tanımlanmasında yardımcı olabilir. Bu çalışmada, insan patojeni olan 10 farklı türe ait standart Malassezia suşu (M.dermatis CBS 9145, M.furfur CBS 7019, M.japonica CBS 9432, M.globosa CBS 7966, M.nana CBS 9561, M.obtusa CBS 7876, M.pachydermatis CBS 1879, M.slooffiae CBS 7956, M.sympodialis CBS 7222 ve M.yamatoensis CBS 9725), modifiye Dixon agar besiyerinde standart kültürü takiben FT-IR spektroskopisi ile incelenmiştir. Çalışmamızda, tüm spektrum analizi ile iki ana grup (M1 grubu; M.globosa, M.obtusa, M.sympodialis, M.dermatis, M.pachydermatis ve M2 grubu; M.furfur, M.japonica, M.nana, M.slooffiae, M.yamatoensis) ayırımı yapılmıştır. M1 grubunda; M.obtusa’nın 1686-1606 $cm^ {-1}$, M2 grubunda M.japonicum’un 2993-2812 $cm^ {-1}$ dalga sayısı penceresinde yapılan ikinci basamak işlemlerinde, düşük düzeyde ayırım gücü ile tanımlandığı görülmüştür. Bununla birlikte, M.sympodialis, M.globosa ve M.pachydermatis ile M.furfur ve M.yamatoensis’in birbirlerinden ayırım gösterdiği bölgeler saptanamamıştır. Sonuç olarak, farklı spektral bölgelerin analiz verilerine göre; FT-IR spektroskopik analizinin, standart kültürü yapılan Malassezia türlerinin ayırımında yeterli olmadığı kanısına varılmıştır.
  • Article
    Citation - WoS: 1
    Citation - Scopus: 1
    Amalgamation Performances of Gold-Coated Quartz Wool, Alumina, Silica, Sand and Carbon Fiber for the Determination of Inorganic Mercury in Waters by Cold Vapor Atomic Absorption Spectrometry
    (Pleiades Publishing, 2017) Erdem Şimşek, Arzu; Erdem Yayayürük, Aslı; Shahwan, Talal; Eroğlu, Ahmet Emin
    Different gold-coated sorbents for amalgamation were applied for the determination of inorganic mercury in waters using a home-made cold vapor generation unit coupled to atomic absorption spectrometry. Among the gold-coated materials investigated (quartz wool, alumina, silica, sand and carbon fiber) quartz wool was found to give the most efficient results in terms of sorption and release. Analytical performance of the system without and with amalgamation was investigated and it was found that when amalgamation was applied, the linearity and slope of the calibration plots were independent on the sample volume for 1.0, 5.0 and 10.0 mL. Method validation was realized through the analysis of a sample of spring water spiked with 1.0 μg/L inorganic mercury and the spike recoveries were found to be 95 ± 1, 91 ± 3, and 99 ± 5% for 1.0, 5.0, and 10.0 mL, respectively. The results demonstrated that the methodology can be applied to these types of samples directly or after amalgamation, depending on the mercury concentration.
  • Article
    Citation - WoS: 5
    Citation - Scopus: 5
    Use of Amberlite Xad-7hp for the Separation of Mn(ii) and Mn(vii) in Waters
    (Pleiades Publishing, 2017) Erdem Yayayürük, Aslı; Eroğlu, Ahmet Emin
    A simple method is proposed for the determination and speciation of Mn(II) and Mn(VII) in waters utilizing a macroporous resin, Amberlite XAD-7HP. The batch method was employed and flame atomic absorption spectrometry was used in all determinations. Amberlite XAD-7HP resin was shown to retain Mn(VII) between pH 4 and 12. If the solution contains only one of the species, either Mn(II) or Mn(VII), the resin behaves selectively depending on the pH of the solution. The elution from the sorbent was realized using K2C2O4 in HNO3. The efficiency of the method was checked via spike recovery experiments. The proposed method was successfully applied to industrial wastewater samples and quantitative recoveries (≥96.0%) confirmed the accuracy of the method.
  • Article
    Citation - WoS: 21
    Citation - Scopus: 23
    Adsorption of Methylene Blue From Aqueous Solution on High Lime Fly Ash: Kinetic, Equilibrium, and Thermodynamic Studies
    (Taylor and Francis Ltd., 2012) Keleşoğlu, Serkan; Kes, Mürşide; Sütçü, Leman; Polat, Hürriyet
    Kinetic, equilibrium, and thermodynamic studies were performed for the batch adsorption of methylene blue (MB) on the high lime fly ash as a low cost adsorbent material. The studied operating variables were adsorbent amount, contact time, dye concentration, and temperature. The kinetic data were analyzed using the pseudo-first order and pseudo-second order kinetic models and the adsorption kinetic was followed well by the pseudo-second order kinetic model. The equilibrium data were fitted with the Freundlich, Langmuir, and Dubinin Radushkevich (D-R) isotherms and the equilibrium data were found to be well represented by the Freundlich and D-R isotherms. Based on these two isotherms MB is taken by chemical ion exchange and active sites on the high lime fly ash have different affinities to MB molecules. Various thermodynamic parameters such as enthalpy of adsorption (ΔH°), free energy change (ΔG°), and entropy change (ΔS°) were investigated. The positive value of ΔH° and negative value of ΔG° indicate that the adsorption is endothermic and spontaneous. The positive value of ΔS° shows the increased randomness at the solid-liquid interface during the adsorption. A single-stage batch adsorber was also designed based on the Freundlich isotherm for the removal of MB by the high lime fly ash. © 2012 Copyright Taylor and Francis Group, LLC.
  • Article
    Citation - WoS: 23
    Citation - Scopus: 26
    Development of Practical Hplc Methods for the Separation and Determination of Eggplant Steroidal Glycoalkaloids and Their Aglycones
    (Taylor and Francis Ltd., 2008) Eanes, Ritchie C.; Tek, Neslihan; Kırsoy, Öyküm; Frary, Anne; Doğanlar, Sami; Almeida, Adelia E.
    A practical set of HPLC methods was developed for the separation and determination of the eggplant steroidal glycoalkaloids, solanine, chaconine, solasonine, solamargine, and their aglycones, solasodine and solanidine. A gradient method was initially developed, but proved to be neither robust nor practical. Three separate isocratic methods using acetonitrile and ammonium dihydrogen phosphate were developed and shown to be more repeatable, less subject to fluctuations in mobile phase composition, and less time consuming. The effect of adjusting buffer pH, column temperature, and buffer type (triethylammonium phosphate vs. ammonium dihydrogen phosphate) were evaluated. It was also discovered that, by addition of 10% methanol to the acetonitrile portion of the mobile phase, more control over the separations was possible. The use of methanol as a mobile phase entrainer greatly improved separations in some cases and its effectiveness was also dependent upon column temperature. Assessments of the method recovery, limit of detection, and limit of quantitation were made using extracts from S. melongena and S. linnaeanum.
  • Article
    Citation - WoS: 2
    Citation - Scopus: 2
    Solid-Phase Microextraction (spme) Followed by On-Fiber Derivatization of Solasodine and Solanidine Aglycones of Steroidal Glycoalkaloids
    (Taylor and Francis Ltd., 2008) Eanes, Ritchie C.; Tek, Neslihan
    Solid-phase microextraction (SPME), followed by on-fiber derivatization was investigated for the analysis of the steroidal glycoalkaloid aglycones, solasodine and solanidine. The aglycones were first extracted by direct immersion of the SPME fiber in the sample medium and then derivatized on the fiber in a separate step using 1-(trimethylsilyl)imidazole (TMSI). The derivatized compounds were then desorbed from the SPME fiber and detected by GC-MS. Polydimethylsiloxane/Divinylbenzene (PDMS-DVB), Carboxen/ Polydimethylsiloxane (CAR-PDMS), and Carbowax/Divinylbenzene (CW-DVB) fibers were employed with the CW-DVB fibers being the most successful, as expected. Closed-end capillary tubes were used to hold the extraction media. Both aglycones were successfully extracted, derivatized, and detected by GC-MS. Solasodine always required derivatization, but solanidine did not. The same method was successfully applied to cholesterol so that it could be used as an internal standard. Also, using the closed-end capillary tubes, a two-phase extraction system was also investigated, whereby the fiber was only exposed to the phase in which it was presumed to be less damaged. However, in all cases, fiber degradation was significant, preventing the use of extended extraction times and limiting reuse of the fibers. However, the results represent a first look into the feasibility of the method. With the development of more suitable SPME phases, this method could potentially provide a complementary route for routine determinations of glycoalkaloids for both research and food quality control.
  • Article
    Citation - WoS: 4
    Citation - Scopus: 5
    Crystal Structure of Distrontium Manganese (iii) Tetraoxophosphate Heptaoxodiphosphate, Sr2mn[po4] [p2o 7]
    (Walter de Gruyter GmbH, 2007) Doğan, Leyla; Eanes, Mehtap
    MnO11P3Sr2, monoclinic, P121/c1 (no. 14), a = 6.641(1) Å, b = 6.834(1) Å, c = 19.554(4) Å, β = 99.22(3)°, V = 876.0 Å3, Z = 4, Rgt(F) = 0.051, wRref(F2) = 0.090, T = 298 K.
  • Article
    Citation - WoS: 6
    Citation - Scopus: 6
    Crystal Structure of Lead(ii) Trioxovanadate(v) Chloride, Pb[vo 3]cl
    (Walter de Gruyter GmbH, 2007) Şahin, Aytaç; Eanes, Mehtap
    ClO3PbV, orthorhombic, Pnma (no. 62), a = 10.022(2) Å, b = 5.288(1) Å, c = 7.171(1) Å, V= 380.0 Å3, Z = 4, Rgt(F) = 0.035, wRref(F2) = 0.105, T= 153 K.
  • Article
    Citation - WoS: 5
    Citation - Scopus: 6
    Oxo-Bridged (haloarylimido)[tris(3,5-Dimethylpyrazolyl)borato] Molybdenum(v) Complexes: Crystal Structures of Geometric Isomers of [motp*(o)cl](µ-O)[motp*(cl)(?nc6h 4br)]
    (De Gruyter, 2005) Sözüer, Hikmet Işıl; Dülger İrdem, Seçkiner; Jeffery, John J.; Hamidov, Hayrullah; Şentürk, Ozan Sanlı
    The reaction between [MoTp*(O)Cl2], [Tp* = hydrotris(3,5-dimetylpyrazol-1-yl)borate] and 4-bromoaniline in refluxing toluene gave geometric isomers of [MoTp*(O)Cl](μ-O)[MoTp*(Cl) (≡NC6H4Br)] (1a, cis; 1b, trans), but a similar reaction between [MoTp*(O)Cl2] and 4-chloroaniline yielded only one product, [MoTp*(O)Cl](μ-O)[MoTp*(Cl)(≡NC 6H4Cl)] (2) as a red crystalline solid. The new compounds were characterized by microanalytical data, mass, IR and 1H NMR spectroscopy. The X-ray structure analysis of 1a and 1b revealed that the complexes are geometric isomers, the two chloro ligands being cis in 1a and trans in 1b. Both compounds have Mo-O-Mo linkages and nearly linear arylimido moieties.
  • Article
    Citation - WoS: 2
    Citation - Scopus: 2
    Redetermination of the Crystal Structure of Sodium Trisamarium Digermanate Dihydroxide, Nasm3(geo4)2(oh)2
    (Walter de Gruyter GmbH, 2002) Eanes, Mehtap
    Ge2H2NaO10Sm3, monoclinic, C12/c1 (No. 15), a = 18.323(3)Å, b = 5.2369(8) Å, c = 12.108(2) Å, β= 131.230(2)°, V = 873.8 Å3, Z = 4, R gt(F) = 0.037, wRref(F2) = 0.010, T= 153 K.