Chemistry / Kimya
Permanent URI for this collectionhttps://hdl.handle.net/11147/4072
Browse
77 results
Filters
Settings
Search Results
Article Citation - Scopus: 1A Perspective on the State-Of Functionalized 2d Materials(American Institute of Physics, 2023) Duran, Tuna; Yayak, Yankı Öncü; Aydın, Hasan; Peeters, François M.; Yağmurcukardeş, MehmetTwo-dimensional (2D) ultra-thin materials are more crucial than their bulk counterparts for the covalent functionalization of their surface owing to atomic thinness, large surface-to-volume ratio, and high reactivity of surface atoms having unoccupied orbitals. Since the surface of a 2D material is composed of atoms having unoccupied orbitals, covalent functionalization enables one to improve or precisely modify the properties of the ultra-thin materials. Chemical functionalization of 2D materials not only modifies their intrinsic properties but also makes them adapted for nanotechnology applications. Such engineered materials have been used in many different applications with their improved properties. In the present Perspective, we begin with a brief history of functionalization followed by the introduction of functionalized 2D materials. Our Perspective is composed of the following sections: the applications areas of 2D graphene and graphene oxide crystals, transition metal dichalcogenides, and in-plane anisotropic black phosphorus, all of which have been widely used in different nanotechnology applications. Finally, our Perspectives on the future directions of applications of functionalized 2D materials are given. The present Perspective sheds light on the current progress in nanotechnological applications of engineered 2D materials through surface functionalization. © 2023 Author(s).Article Citation - WoS: 1Citation - Scopus: 1Investigation of Cytotoxic Properties of Some Isoindole-Related Compounds Bearing Silyl and Azide Groups With in Vitro and in Silico Studies(Taylor & Francis, 2023) Tan, Ayşe; Köse, Aytekin; Mete, Derya; Şanlı Mohamed, Gülşah; Kışhalı, Nurhan H.; Kara, YunusThis study aims to evaluate the synthesis of isoindole-1,3-dione analogues and their cytotoxic potential. A549 and HeLa cells exposed to 250-100-50-25 mu M doses of each derivative were incubated for 24, 48, and 72 h. The cytotoxicity of the isoindole-1,3-dione derivatives was analyzed using the cell growth inhibition assay and the cell membrane damage test. (3aR,5R,6R,7aS)-5-Azido-2-benzyl-6-hydroxyhexahydro-1H-isoindole-1,3(2H)-dione (1d), (3aR,5R,6R,7aS)-5-azido-6-((tert-butyldiphenylsilyl)oxy)-2-ethylhexahydro-1H-isoindole-1,3(2H)-dione (2a), and (3aR,5R,6R,7aS)-5-azido-6-((tert-butyldiphenylsilyl)oxy)-2-methylhexahydro-1H-isoindole-1,3(2H)-dione (2b) compounds inhibited the growth of the A549 and HeLa cells caused membrane damage and exhibited a dose-dependent cytotoxic effect on lung and cervical carcinoma cells. The effect of tert-butyldiphenylsilyl (TBDPS) groups on cytotoxicity was observed in compounds 2a and 2b, but not in the other compounds. Considering the effect of groups attached to the nitrogen atom, the best activity was exhibited in 2b molecule to which the methyl group is attached. Additionally, the interactions of compounds (3aR,5R,6R,7aS)-5-azido-6-hydroxy-2-methylhexahydro-1H-isoindole-1,3(2H)-dione (1b), 1d, 2a and 2b with mammalian rapamycin target, human ribosomal S6 kinase 1 and human epidermal growth factor receptor were investigated by molecular docking studies, . According to the docking results, 2a and 2b compounds containing a TBDPS group have stronger binding energies than 1b and 1d compounds against all target receptors.Article Citation - WoS: 1Citation - Scopus: 2A Molecularly Imprinted Polymer as Solid Phase Extraction Sorbent for Ketoprofen Determination in Water and Artificial Serum Prior To Hplc(TÜBİTAK - Türkiye Bilimsel ve Teknolojik Araştırma Kurumu, 2022) Shahwan, Talal; Gürel Özyurt, Elif; Özyurt, Ömer; Ölçer, Yekta Arya; Eroğlu, Ahmet Emin; Boyacı, EzelKetoprofen (KET) is an active pharmaceutical compound that has pain relieving and antipyretic effects. Its determination in body fluids and environmental waters is important due to widespread use of the compound. In this study, a selective and reliable method has been developed for the determination of ketoprofen in water and artificial serum using molecularly imprinted polymers (MIPs) as a solid phase extraction sorbent prior to HPLC-DAD detection. The MIP was synthesized by copolymerization of methacrylic acid (MAA) and trimethylpropane trimethacrylate (TRIM) in the presence of ketoprofen as the template. For the sake of comparison, nonimprinted polymer (NIP) was also synthesized under the same experimental conditions without the addition of ketoprofen under the same experimental conditions. Critical extraction parameters such as sample pH, shaking time and sorbent amount were optimized and adjusted to 8.0, 24 h, and 10.0 mg, respectively, for a sample volume of 10.0 mL. MIP showed higher selectivity than NIP towards ketoprofen in an artificial matrix containing another pain relieving drug, ibuprofen, and a cardiovascular drug, metoprolol. The proposed method was successfully applied for the detection of ketoprofen in spiked drinking water, tap water, and artificial serum samples, and showed satisfactory results with respective recoveries of 96.8 % (± 0.8), 93.7% (± 0.6), 62.2% (± 0.6), and 69.9% (± 0.6).Article Citation - WoS: 3Citation - Scopus: 3Structural and Functional Analyses of Gh51 Alpha-L of Geobacillus Vulcani Gs90 Reveal Crucial Residues for Catalytic Activity and Thermostability(Wiley, 2022) Sürmeli, Yusuf; Şanlı Mohamed, GülşahAlpha-L-arabinofuranosidase (Abf) is of big interest in various industrial areas. Directed evolution is a powerful strategy to identify significant residues underlying Abf properties. Here, six active variants from GH51 Abf of Geobacillus vulcani GS90 (GvAbf) by directed evolution were overproduced, extracted, and analyzed at biochemical and structural levels. According to the activity and thermostability results, the most-active and the least-active variants were found as GvAbf51 and GvAbf52, respectively. GvAbf63 variant was more active than parent GvAbf by 20% and less active than GvAbf51. Also, the highest thermostability belonged to GvAbf52 with 80% residual activity after 1 h. Comparative sequence and structure analyses revealed that GvAbf51 possessed L307S displacement. Thus, this study suggested that L307 residue may be critical for GvAbf activity. GvAbf63 had H30D, Q90H, and L307S displacements, and H30 was covalently bound to E29 catalytic residue. Thus, H30D may decrease the positive effect of L307S on GvAbf63 activity, preventing E29 action. Besides, GvAbf52 possessed S215N, L307S, H473P, and G476C substitutions and S215 was close to E175 (acid–base residue). S215N may partially disrupt E175 action. Overall effect of all substitutions in GvAbf52 may result in the formation of the C–C bond between C171 and C213 by becoming closer to each other.Article Citation - WoS: 4Citation - Scopus: 4Identification of a Magnetic Phase Via a Raman Spectrum in Single-Layer Mnse: an Ab Initio Study(Elsevier, 2022) Yayak, Yankı Öncü; Şahin, Hasan; Yağmurcukardeş, MehmetMotivated by the recent experimental realization of single-layer two-dimensional MnSe [ACS Nano2021, 15, 13794-13802], structural, magnetic, elastic, vibrational, and electronic properties of single-layer MnSe are investigated by using density functional theory-based calculations. Among four different magnetic phases, namely, ferromagnetic (FM) and Nẽel-, zigzag-, and stripy-antiferromagnetic (AFM) phases, the Nẽel-AFM structure is found to be the energetically most favorable phase. Structural optimizations show the formation of in-plane anisotropy within the structures of zigzag- and stripy-AFM phases in single-layer MnSe. For the dynamically stable four magnetic phases, predicted Raman spectra reveal that each phase exhibits distinctive vibrational features and can be distinguished from each other. In addition, the elastic constants indicate the mechanical stability of each magnetic phase in single-layer MnSe and reveal the soft nature of each phase. Moreover, electronic band dispersion calculations show the indirect band gap semiconducting nature with varying electronic band gap energies for all magnetic phases. Furthermore, the atomic orbital-based density of states reveals the existence of out-of-plane orbitals dominating the top valence states in zigzag- and stripy-AFM phases, giving rise to the localized states. The stability of different magnetic phases and their distinct vibrational and electronic properties make single-layer MnSe a promising candidate for nanoelectronic and spintronic applications.Article Citation - WoS: 4Citation - Scopus: 4A Cyclopalladated Bodipy Construct as a Fluorescent Probe for Carbon Monoxide(Wiley, 2022) Çevik Eren, Merve; Eren, Ahmet; Dartar, Suay; Tütüncü, Büşra Buse; Emrullahoğlu, MustafaBy introducing a palladium ion into the backbone of BODIPY, we devised a cyclopalladated BODIPY construct that was almost non-emissive in the absence of any analyte but became highly fluorescent upon interacting with carbon monoxide (CO) in solution and in living cells. A process of ortho-carbonylation and depalladation mediated by the specific binding of CO to palladium, promoted the release of the heavy atom from the fluorophore and consequently generated a fluorescence signal with an exceptionally high (60-fold) enhancement ratio.Article Citation - WoS: 3Citation - Scopus: 1Transition Metal Salt Promoted, Green, and High-Yield Synthesis of Silver Nanowires for Flexible Transparent Conductive Electrodes(Wiley-Blackwell, 2021) Sarısözen, Sema; Tertemiz, Necip Ayhan; Arıca, Tuğçe Aybüke; Polat, Nahit; Kocabaş, Çoşkun; Mert Balcı, Fadime; Balcı, SinanSilver nanowires (AgNWs) have attracted considerable interest from both academia and industry owing to their excellent electrical, optical, and chemical properties. For large-scale synthesis of AgNWs, the polyol method involving ethylene glycol, a toxic alcohol, has been widely used. We herein report on a facile, green, high yield, transition metal salt promoted, open atmosphere method for the synthesis of high quality AgNWs in a glycerol-water mixture. We have shown that transition metal salts have a strong influence on the morphology of AgNWs. Importantly, in the presence of copper(II) chloride, AgNWs with a high aspect ratio of around 400 (length, 36 μm; diameter, 90 nm) were obtained. Additionally, for the first time, we have demonstrated AgNWs based flexible transparent conductive electrodes (TCEs) on poly(sodium 4-styrenesulfonate) (PSS) treated polyethylene terephthalate (PET) substrate with a sheet resistance of 34 Ω/sq and transmittance of 91 % at 550 nm. The PSS layer on the PET substrate generated a highly hydrophilic surface, which boosts interaction of AgNWs with the PET surface. We envision that our results would play a significant role both in the synthesis of AgNWs with high aspect ratio and also in designing new rigid and flexible TCEs having high transmittance and low sheet resistance for applications especially in printable solar cells, organic light emitting diodes, and high performance flexible electronics.Article Citation - WoS: 2Citation - Scopus: 31-Octanol Is a Functional Impurity Modifying Particle Size and Photophysical Properties of Colloidal Zncdsse/Zns Nanocrystals(American Chemical Society, 2021) Sevim Ünlütürk, Seçil; Çağır, Ali; Varlıklı, Canan; Özçelik, SerdarImpurities in trioctylphophine (TOP) strongly affect nanocrystal synthesis. 1-Octanol among other contaminants in TOP is identified for the first time as a functional impurity by H-1 NMR. The deliberate addition of 1-octanol into trioctylphosphine reduced particle size and modified photophysical properties of ZnCdSSe/ZnS colloidal nanocrystals. NMR analysis furthermore revealed that 1-octanol is bonded to the nanocrystal surfaces. The ratio of integrals for the O-CH2 protons of 1-octanol, which is the lowest compared to the other ligands, suggests that 1-octanol plays a critical role to tune the particle size of nanocrystals. The increased amount of 1-octanol added into TOP reduces the particle size from 9.8 to 7.2 nm, causing a progressive blue shift in the UV-vis and PL spectra but leaving the alloy composition unaffected. The rate of nonradiative processes is enhanced with the amount of 1-octanol added into TOP, correlating with higher dislocation density observed in the nanocrystals. As a conclusion, 1-octanol is proposed as a functional impurity that varies particle size and nonradiative photophysical processes in the ZnCdSSe/ZnS colloidal nanocrystals.Article Citation - WoS: 3Citation - Scopus: 4Enhanced Thermostability of the Immobilized Thermoalkalophilic Esterase Onto Magnetic-Cornstarch Nanoparticle(Wiley, 2022) Öz, Yasin; Sürmeli, Yusuf; Şanlı Mohamed, GülşahThe immobilization of the biocatalysts onto magnetic nanoparticles has been extensively applied as the external magnetic field facilitates the enzyme recovery from the reaction mixture. In the present study, glutaraldehyde-modified magnetite-cornstarch nanoparticles (MCNs) were successfully synthesized, elaborately characterized by ZetaSizer and surface-enhanced Raman spectroscopy, and used for the immobilization of a thermoalkalophilic esterase from Geobacillus sp. The optimal immobilization conditions were obtained at 65 degrees C, 2:3 molar ratios of Fe2+:Fe3+, and 1 g cornstarch resulted in approximately 90 nm magnetic particles in size. Also, immobilization yield and immobilization efficiency of the esterase were found as 74% and 82%, respectively. Scanning electron microscopy micrographs showed that MCNs were uniform, spherical in shape, and well dispersed and esterase immobilized MCNs displayed similar morphology as free MCNs. The maximum activity of free and immobilized esterase was obtained at 65 degrees C and pH 9. Immobilization onto glutaraldehyde-modified MCNs significantly enhanced the esterase thermostability. Additionally, the immobilized esterase kept its residual activity of 75% after three sequential cycles, suggesting that it has favorable operational stability.Article Citation - WoS: 7Citation - Scopus: 8Thermoalkalophilic Recombinant Esterase Entrapment in Chitosan/Calcium Beads and Its Characterization(Wiley, 2021) Tercan, Cisem; Sürmeli, Yusuf; Şanlı Mohamed, GülşahBACKGROUND Esterases (EC 3.1.1.1), a class of hydrolases, degrade the ester bonds of lipids into alcohol and carboxylic acids and synthesize carboxylic ester bonds. They are used in a variety of biotechnological, industrial, environmental, and pharmaceutical applications due to their many valuable properties. Particularly, extremophilic esterases with many superior properties are of great interest for various reactions. Immobilization of enzymes may provide some advantages over free enzymes not only to improve the properties of enzymes but also to increase the reusability of biocatalyst in industrial applications. Therefore, many different immobilization applications for enzymes have been reported in various studies. To our knowledge, a thermophilic esterase has not so far been immobilized by entrapment using chitosan/calcium/alginate-blended beads. Here, we reported the immobilization of thermoalkalophilic recombinant esterase by entrapment using chitosan/calcium/alginate-blended beads, and then the entrapped esterase was characterized biochemically in details. RESULTS In the present study, a thermophilic recombinant esterase was immobilized by entrapment in chitosan/calcium/alginate-blended beads for the first time. The 0.5 mg mL(-1) purified recombinant esterase was entrapped in 1% chitosan, 2% alginate, and 0.7 M CaCl2 blended beads. The results showed that immobilization yield and entrapment efficiency of the entrapped esterase were 69.5% and 80.4%, respectively. SEM micrograph showed that the surface of the beads resembled a mesh and very compact structures. Chitosan/calcium/alginate-blended beads exhibited an 18.8% swelling ratio and had a moderate porous structure. The entrapment technique highly enhanced the thermostability of the esterase and shifted its optimum temperature from 65 to 80 degrees C. The immobilized esterase was very stable in a wide range of pH (8.5-11) displaying maximum activity at pH 9. ZnCl2 slightly increased the activity of immobilized esterase whereas several metal ions reduced the enzyme activity. When the enzyme was immobilized in chitosan/calcium/alginate-blended beads, its K-m increased about 2 times and V-max value decreased almost 1.5 times. Immobilization allowed repeated uses of the esterase having good operational stability in a continuous process. CONCLUSION The results revealed that the immobilization of a thermophilic recombinant esterase by entrapment in chitosan/calcium/alginate-blended beads exhibited considerably better compared to other immobilization processes with various entrapment strategies. (c) 2021 Society of Chemical Industry (SCI).