Chemistry / Kimya
Permanent URI for this collectionhttps://hdl.handle.net/11147/4072
Browse
10 results
Search Results
Article Citation - WoS: 9Citation - Scopus: 8Quantitative Determination of Phenolic Compounds in Propolis Samples From the Black Sea Region (türkiye) Based on Hptlc Images Using Partial Least Squares and Genetic Inverse Least Squares Methods(Elsevier, 2023) Güzelmeriç, Etil; Özdemir, Durmuş; Şen, Nisa Beril; Çelik, Cansel; Yeşilada, ErdemThe complex chemical composition of propolis is related to the plant source to be used by honeybees. Propolis type is defined based on the plant source with the highest proportion in its composition, which is determined by chromatographic techniques as high-performance thin-layer chromatography (HPTLC). In addition to marker component identification to specify the propolis type, quantification of its proportion is also significant for prediction and reproducible pharmacological activity. One drawback for propolis marker component quantita-tion is that during the chromatographical analysis, not the main but the other plant sources with less proportion may cause interferences during the chemical analysis. In this study, the amounts of marker components were compared with the reference analysis data obtained by high-performance liquid chromatography (HPLC) and from HPTLC images using Partial Least Squares (PLS) and Genetic Inverse Least Squares (GILS) regression methods. Firstly, HPTLC images of propolis samples were processed by an image algorithm (developed in MATLAB) where the bands of each standard and the samples were cut same dimensional pieces as 351 x 26 pixels in height and width, respectively. Simultaneously, reference analysis of the marker components in propolis samples was performed with a validated HPLC method. Consequently, the reference values obtained from HPLC versus PLS, and GILS predicted values of the eight compounds based on the digitized HPTLC images of the chromatograms were found to be matched successfully. The results of the multivariate calibration models demonstrated that HPTLC images could be used quantitatively for quality control of propolis used as a food supplement.Article Molecular Dynamics Simulation of Ssdna and Cationic Polythiophene(Elsevier, 2023) Nalıncı Bardak, Nehir; Kıbrıs, Erman; Demirci, Fethi Can; Elmacı Irmak, NuranIn this work, molecular dynamics simulations of complexes composed of single strand DNA (ssDNA) sequences and cationic oligothiophenes are performed to understand experimental findings and the sensing ability of polythiophene electrolytes toward ssDNA. The simulation results exhibit no significant structural effect for replacing the cationic amine moiety with imidazole derivative on the side group of the oligomer. Adding a homopurine strand elongates the oligomer backbone; on the contrary, mixing up the homopyrimidine strand causes compression. On the other hand, these ssDNAs do not notably affect the compactness of the oligomer backbones. The anion-cation interactions play an essential role in the structural and spectroscopic change of cationic polythiophenes (CPTs) upon complexation with ssDNAs. The red shift of CPTs in the UV-VIS spectra with the addition of homopurine strands might be explained by the strong anion-cation, weak pi -cation interactions, and high binding affinities. Nonpolar interactions (vdW and SA) and complex solvation energies dominate binding free energies. Hydrogen interaction analyses show that oligomers most likely approach the ssDNAs from their backbone upon complexation except for the duplex containing homopyrimidine strand and oligothiophene possessing imidazole derivative side chain.Article Citation - WoS: 43Citation - Scopus: 46Glucuronoxylan-Based Quince Seed Hydrogel: a Promising Scaffold for Tissue Engineering Applications(Elsevier, 2021) Güzelgülgen, Meltem; Özkendir İnanç, Dilce; Yıldız, Ümit Hakan; Arslan Yıldız, AhuNatural gums and mucilages from plant-derived polysaccharides are potential candidates for a tissue-engineering scaffold by their ability of gelation and biocompatibility. Herein, we utilized Glucuron-oxylanbased quince seed hydrogel (QSH) as a scaffold for tissue engineering applications. Optimization of QSH gelation was conducted by varying QSH and crosslinker glutaraldehyde (GTA) concentrations. Structural characterization of QSH was done by Fourier Transform Infrared Spectroscopy (MR). Furthermore, morphological and mechanical investigation of QSH was performed by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). The protein adsorption test revealed the suitability of QSH for cell attachment. Biocompatibility of QSH was confirmed by culturing NIH-3T3 mouse fibroblast cells on it. Cell viability and proliferation results revealed that optimum parameters for cell viability were 2 mg mi(-1)of QSH and 0.03 M GTA. SEM and DAPI staining results indicated the formation of spheroids with a diameter of approximately 300 pm. Furthermore, formation of extracellular matrix (ECM) microenvironment was confirmed with the Collagen Type-I staining. Here, it was demonstrated that the fabricated QSH is a promising scaffold for 3D cell culture and tissue engineering applications provided by its highly porous structure, remarkable swelling capacity and high biocompatibility. (C) 2021 Published by Elsevier B.V.Article Citation - WoS: 4Citation - Scopus: 5Cytotoxic and Apoptotic Effects of 1,2-Diborolanes With Strong Donor Substitutes on Human Cancer Cells(Elsevier, 2021) Şahin, Yüksel; Aslantürk, Özlem Sultan; Çelik, Tülay; Sevinçek, Resul; Aygün, Muhittin; Metin, Kubilay; Fırıncı, Erkan; Özgener, HüseyinIn recent years, boron compounds have become more common as chemotherapy agents against certain types of cancers. Along with the development of boron-based therapeutic agents have come investigations into the various cancers and biochemical and molecular mechanisms affected by boron compounds and the relationships between boron compounds and chemical protection against cancer. In this preliminary study, the effects of new 1,2-N-substituted-1,2-diborolane derivatives on types of breast and liver cancers were examined for the first time. Four were found to significantly affect the cell viabilities and mitochondrial membrane potential changes in MCF-7, HepG2 and Hep3B cancer cells. Each was prepared in n-hexane at various concentrations (5, 10, 25, 50, 75 and 100 µg/mL). Human peripheral blood lymphocytes were used as control cells. Compounds 1, 2, 3a, and 3b 1,2-diborolane derivatives selectively killed cancer cells, but compound 1 was cytotoxic in a concentration-dependent manner on HepG2 and Hep3B and only at concentrations of at least 75 µg/mL on MCF-7 cells. Compound 3a exhibited cytotoxic effect on lymphocytes at 75 and 100 µgmL-1 concentrations, but compounds 1, 2 and 3b, 3c and 3d have not possessed significant cytotoxic effect on lymphocytes. Compounds 3c and 3d have not possessed significant cytotoxic effects. Mitochondrial membrane potential assay results supported these findings. Our results reveal that 1,2-diborolane derivates have high cytotoxic and apoptotic activities on human hepatocarcinoma cells and are therefore potential candidates in the development of new drugs against liver cancer.Article Citation - WoS: 10Citation - Scopus: 11A New Drug Testing Platform Based on 3d Tri-Culture in Lab-On Devices(Elsevier, 2020) Gökçe, Begüm; Akçok, İsmail; Çağır, Ali; Pesen Okvur, DevrimDrug discovery has a 90% rate of failure because preclinical platforms for drug testing do not mimic the in vivo conditions. Doxorubicin (DOX) is a commonly used drug to treat breast cancer patients even though it has side effects. Lab-on-a-chip (LOC) devices provide spatial control at the micrometer scale and can thus emulate the cancer microenvironment. Here, using a multidisciplinary approach, a new drug testing platform based on 3D tri-culture in LOC devices was developed. Breast cancer cells alone or with normal mammary epithelial cells and macrophages were cultured in matrigel in LOC devices. The platform was used to test DOX and (R)-4'-methylklavuzon (KLA), which is a new anti-cancer drug candidate. Results showed that DOX and KLA were equally effective on breast cancer cells in 3D monoculture. KLA produced 26% less death for breast cancer cells than DOX in 3D tri-culture. More importantly, DOX was not selective between breast cancer cells and normal mammary epithelial cells in 3D tri- culture whereas KLA caused 56% less cell death than DOX for normal mammary epithelial cells. Results strongly recommend that 3D tri-culture in LOC devices be used for assessment of drug toxicity at the preclinical stage.Article Citation - WoS: 39Citation - Scopus: 44Identification and Characterization of Novel Thermostable Alpha-Amylase From Geobacillus Sp. Gs33(Elsevier, 2020) Burhanoğlu, Tülin; Sürmeli, Yusuf; Şanlı Mohamed, GülşahIn this study, the heterologous expression and biochemical characterization of a thermostable alpha-amylase from Geobacillus sp. GS33 was investigated. The recombinant alpha-amylase was overexpressed in Escherichia coli BL21 (lambda DE) and purified via anion exchange and size-exclusion chromatography. The purified alpha-amylase had a molecular weight of about 60 kDa, and was active in a broad range of pH 3-10 and temperature (40-90 degrees C) withmaximumactivity at pH 7-8 and 60 degrees C. The enzyme retained 50% residual activity at 65 degrees C, but only 20% at 85 degrees C after 16 h. At pH 9 and pH 7, the residual activity at 65 degrees C was 50% and 30%, respectively. The enzymewas remarkably activated by Co2+, Ca2+, Mg2+, PMSF, DTT, and Triton X-100, but partially inhibited by Cu2+, methanol, hexane, ethanol, acetone, SDS, and Tween 20. A molecular phylogeny analysis showed that the enzyme's amino acid sequence had the closest connection with an alpha-amylase from Geobacillus thermoleovorans subsp. stromboliensis nov. 3D-structure-based amino acid sequence alignments revealed that the three catalytic residues (D217, E246, D314) and the four Ca2+ ion coordination residues (N143, E177, D186, H221) were conserved in alpha-amylase from Geobacillus sp. GS33. The temperature stability and neutral pH optimum suggest that the enzyme may be useful for industrial applications. (C) 2020 Elsevier B.V. All rights reserved.Article Citation - WoS: 39Citation - Scopus: 37Flow-Through Colorimetric Assay for Detection of Nucleic Acids in Plasma(Elsevier, 2019) Ammanath, Gopal; Yeasmi, Sanjida; Srinivasulu, Yuvasri; Vats, Mukti; Cheema, Jamal Ahmed; Nabilah, Fairuz; Liedberg, Bo; Yıldız, Ümit HakanA flow-through colorimetric assay for detection of nucleic acids in plasma is reported. The proposed assay features an array of four polyvinylidene fluoride (PVDF) membranes impregnated with cationic poly (3-alkoxy-4-methylthiophene) (PT) as an optical reporter. The sensing strategy is based on monitoring the changes in optical properties of PT, upon complexation with target nucleic acids in the presence and in the absence of their corresponding complementary peptide nucleic acids (PNAs). As a proof of concept, the proposed methodology is validated using two biomarkers; lung cancer associated microRNA (mir21) and hepatitis B virus DNA (HBV-DNA). The flow-through colorimetric assay enabled detection of mir21 and HBV-DNA in plasma without requiring tedious sample pre-treatment and clean up protocols. Colorimetric responses for mir21 and HBV-DNA were obtained at nanomolar concentrations over five orders of magnitudes (from 1 nM to 10 mu M), with a limit of detection of -0.6 nM and -2 nM in DI water and plasma, respectively. A logic gate system was developed to utilize the colorimetric assay responses as inputs for discrimination of mir21 and HBV-DNA and subsequently to obtain a profile of nucleic acids in samples that exceed respective clinical threshold limits, thereby enabling rapid and point of care (POC) disease diagnosis. Furthermore, the proposed methodology can be utilized for detection of a large number of nucleic acids in plasma by extending the array of PT impregnated membranes incorporated with their corresponding complementary PNAs. (C) 2019 Elsevier B.V. All rights reserved.Article Citation - WoS: 90Citation - Scopus: 101A Rapid Atr-Ftir Spectroscopic Method for Classification of Gelatin Gummy Candies in Relation To the Gelatin Source(Elsevier, 2019) Çebi, Nur; Doğan, Canan Ekinci; Ekin Meşe, Ayten; Özdemir, Durmuş; Arıcı, Muhammet; Sağdıç, OsmanGelatin is widely used in gummy candies because of its unique functional properties. Generally, porcine and bovine gelatins are used in the food industry. FTIR-ATR combined with chemometrics analysis such as hierarchical cluster analysis (HCA) (OPUS Version 7.2 software), principal component analysis (PCA) (OPUS Version 7.2 software) and partial least squares-discriminant analysis (PLS-DA) (Matlab R2017b) were used for classification and discrimination of gelatin gummy candies related to their gelatin source. The spectral region between 1734 and 1528 cm(-1) was selected for chemometric analysis. The potential of FTIR spectroscopy for determination of bovine and porcine source in gummy candies was examined and validated by a real-time polymerase chain reaction (PCR) method. Twenty commercial samples were tested by developed ATR-FTIR methodology and RT-PCR technique, mutually confirming and supporting results were obtained. Gummy candies were classified and discriminated in relation to the bovine or porcine source of gelatin with 100% success without any sample preparation using FTIR-ATR technique.Article Citation - WoS: 17Citation - Scopus: 19Pixelated Colorimetric Nucleic Acid Assay(Elsevier, 2020) Aydın, Hakan Berk; Cheema, Jamal Ahmed; Arnmanath, Gopal; Toklucu, Cihan; Yücel, Müge; Özenler, Sezer; Yıldız, Ümit HakanConjugated polyelectrolytes (CPEs) have been widely used as reporters in colorimetric assays targeting nucleic acids. CPEs provide naked eye detection possibility by their superior optical properties however, as concentration of target analytes decrease, trace amounts of nucleic acid typically yield colorimetric responses that are not readily perceivable by naked eye. Herein, we report a pixelated analysis approach for correlating colorimetric responses of CPE with nucleic acid concentrations down to 1 nM, in plasma samples, utilizing a smart phone with an algorithm that can perform analytical testing and data processing. The detection strategy employed relies on conformational transitions between single stranded nucleic acid-cationic CPE duplexes and double stranded nucleic acid-CPE triplexes that yield distinct colorimetric responses for enabling naked eye detection of nucleic acids. Cationic poly[N,N,N-triethyl-3-((4-methylthiophen-3-yl)oxy)propan-1-aminium bromide] is utilized as the CPE reporter deposited on a polyvinylidene fluoride (PVDF) membrane for nucleic acid assay. A smart phone application is developed to capture and digitize the colorimetric response of the individual pixels of the digital images of CPE on the PVDF membrane, followed by an analysis using the algorithm. The proposed pixelated approach enables precise quantification of nucleic acid assay concentrations, thereby eliminating the margin of error involved in conventional methodologies adopted for interpretation of colorimetric responses, for instance, RGB analysis. The obtained results illustrate that a ubiquitous smart phone could be utilized for point of care colorimetric nucleic acids assays in complex matrices without requiring sophisticated software or instrumentation.Article Citation - WoS: 45Citation - Scopus: 46Electrospun Polystyrene Fibers Knitted Around Imprinted Acrylate Microspheres as Sorbent for Paraben Derivatives(Elsevier, 2018) Demirkurt, Merve; Ölçer, Yekta Arya; Demir, Mustafa Muammer; Eroğlu, Ahmet EroğluParabens are used as antimicrobial preservatives in food, cosmetic products and pharmaceuticals regardless of their endocrine disrupting effect. In this study, highly selective molecular imprinted polymers (MIPs) were synthesized in submicron-sizes and converted to an SPME fiber coating through electrospinning process in order to determine parabens in water samples. Conversion of MIP to a fiber is achieved via creation of spacial knitting around MIP by polystyrene. The selectivity and extraction ability of the fibers were compared with the commercial fibers and the corresponding non-imprinted polymer (NIP) coated fiber. The coated fiber showed better extraction ability among them. Also, the results revealed that the fiber has better selectivity for benzyl paraben and the other structurally-related compounds, such as methyl and propyl paraben. Extraction efficiency of prepared fibers for three parabens has been tested by spiking bottled, tap and sea water samples. The recoveries changed between 92.2 ± 0.8 and 99.8 ± 0.1 for three different water types. This method could be used for selective and sensitive determination of parabens in aqueous samples.