Chemistry / Kimya
Permanent URI for this collectionhttps://hdl.handle.net/11147/4072
Browse
5 results
Search Results
Article Citation - WoS: 15Citation - Scopus: 21Preparation, Characterization and Optimization of Chitosan Nanoparticles as Carrier for Immobilization of Thermophilic Recombinant Esterase(Taylor and Francis Ltd., 2011) İlgü, Hüseyin; Turan, Taylan; Şanlı Mohamed, GülşahImmobilization of biologically important molecules on myriad nano-sized materials has attracted great attention. Through this study, thermophilic esterase enzyme was obtained using recombinant DNA technology and purified applying one-step His-Select HF nickel affinity gel. The synthesis of chitosan was achieved from chitin by deacetylation process and degree of deacetylation was calculated as 89% by elemental analysis. Chitosan nanoparticles were prepared based on the ionic gelation of chitosan with tripolyphosphate anions. The physicochemical properties of the chitosan and chitosan nanoparticles were determined by several methods including SEM (Scanning Electron Microscopy), FT-IR (Fourier Transform Infrared Spectroscopy) and DLS (Dynamic Light Scattering). The morphology of chitosan nanoparticles was spherical and the nanospheres' average diameter was 75.3 nm. The purified recombinant esterase was immobilized efficiently by physical adsorption onto chitosan nanoparticles and effects of various immobilization conditions were investigated in details to develope highly cost-effective esterase as a biocatalyst to be utilized in biotechnological purposes. The optimal conditions of immobilization were determined as follows; 1.0 mg/mL of recombinant esterase was immobilized on 1.5 mg chitosan nanoparticles for 30 min at 60C, pH 7.0 under 100 rpm stirring speed. Under optimized conditions, immobilized recombinant esterase activity yield was 88.5%. The physicochemical characterization of enzyme immobilized chitosan nanoparticles was analyzed by SEM, FT-IR and AFM (Atomic Force Microscopy).Article Citation - WoS: 45Polymers and Inorganics: a Happy Marriage?(Polymer Society of Korea, 2007) Wegner, Gerhard; Demir, Mustafa Muammer; Faatz, Michael; Gorna, Katazyrna; Munoz-Espi, Rafael; Guillemet, Baptiste; Gröhn, FranziskaThe most recent developments in two areas: (a) synthesis of inorganic particles with control over size and shape by polymer additives, and (b) synthesis of inorganic-polymer hybrid materials by bulk polymerization of blends of monomers with nanosized crystals are reviewed. The precipitations of inorganics, such as zinc oxide or calcium carbonate, in presence and under the control of bishydrophilic block or comb copolymers, are relevant to the field of Biomineralization. The application of surface modified latex particles, used as controlling agents, and the formation of hybrid crystals in which the latex is embedded in otherwise perfect crystals, are discussed. The formation of nano sized spheres of amorphous calcium carbonate, stabilized by surfactant-like polymers, is also discussed. Another method for the preparation of nanosized inorganic functional particles is the controlled pyrolysis of metal salt complexes of poly (acrylic acid), as demonstrated by the syntheses of lithium cobalt oxide and zinc/magnesium oxide. Bulk polymerization of methyl methacrylate blends, with for example, nanosized zinc oxide, revealed that the mechanisms of free radical polymerization respond to the presence of these particles. The termination by radical-radical interaction and the gel effect are suppressed in favor of degenerative transfer, resulting in a polymer with enhanced thermal stability. The optical properties of the resulting polymer-particle blends are addressed based on the basic discussion of the miscibility of polymers and nanosized particles.Article Citation - WoS: 2Citation - Scopus: 2Composites of Reactive Silica Nanoparticles and Poly(glycidyl Methacrylate) With Linear and Crosslinked Chains by in Situ Bulk Polymerization(Taylor and Francis Ltd., 2010) Demir, Mustafa Muammer; Altın, Burcu; Özçelik, SerdarComposites of poly(glycidyl methacrylate) (PGMA) and L-lysine-coated silica nanoparticles with varying contents were prepared by in situ bulk polymerization using benzoyl peroxide (BPO) as free radical initiator. Silica nanoparticles covered by L-lysine molecules were synthesized using emulsion method. Dynamic light scattering measurements confirmed that the particles are highly monodisperse with the diameter of 10 nm and free of aggregates in the monomer (glycidyl methacrylate, GMA). Upon polymerization of the homogeneous particle/monomer dispersion, aggregates of individual silica nanoparticles are observed by tapping mode atomic force microscope (AFM). Amine and/or carboxylic acid sites on particle surface covalently react with the oxirane groups of the polymer backbone. The aggregation was substantially suppressed by using a difunctional comonomer divinyl benzene (DVB) in polymerization. A three-dimensional polymer network, P(GMA-DVB), forms throughout the system. This structure leads to significant progress in particle dispersion, therefore in physical properties of the resulting composite. We demonstrated that the composites prepared by crosslinked chains are thermally more stable and mechanically stiffer than those prepared by linear ones.Article Citation - WoS: 15Citation - Scopus: 15Controlling Spontaneous Emission of Cdse Nanoparticles Dispersed in Electrospun Fibers of Polycarbonate Urethane(American Chemical Society, 2009) Demir, Mustafa Muammer; Soysal, Duygu; Ünlü, Caner; Kuş, Mahmut; Özçelik, SerdarLuminescent fibrous composite films consisting of submicrometer diameter fibers were prepared by electrospinning of segmented polycarbonate urethane (PCU) in dimethyl formamide and tri-n-octylphosphine oxide (TOPO)-capped CdSe nanocrystals (5 nm in diameter) in toluene. Using a pair of conductive electrodes separated with an air gap, we successfully produced randomly deposited and uniaxially aligned electrospun fibers. The surface structure of the electrospun fibers was studied using atomic force microscopy (AFM) and was compared to the corresponding film prepared by casting. In cast film, tapping mode AFM imaging suggests that hard urethane segments organize into rodlike morphology dispersed in soft polycarbonate. When PCU/ CdSe dispersions were subjected to electrospinning, copolymer domains were forced to arrange into lamella along the fiber axis due to elongational flow and high stretching. Molecular orientation in the domains of the composite fibers was confirmed by polarized infrared spectroscopy. We demonstrated that formation of the oriented domains by electrospinning develops a hierarchical structure, which consequently modifies spectral properties because new multiple sharp lines appeared in the photoluminescence (PL) spectra of the fibers. In contrast to randomly deposited fibers, the PL intensity of uniaxially aligned fibers was found to be angle dependent. We propose that the elongated internal structure within the fibers controls the spontaneous emission of CdSe nanoparticles dispersed throughout the electrospun mat. A discussion on the nature of the controlled spontaneous emission is provided.Article Citation - WoS: 119Citation - Scopus: 151Batch Removal of Aqueous Cu2+ Ions Using Nanoparticles of Zero-Valent Iron: a Study of the Capacity and Mechanism of Uptake(American Chemical Society, 2008) Karabelli, Duygu; Üzüm, Çağrı; Shahwan, Talal; Eroğlu, Ahmet Emin; Scott, Tom B.; Hallam, Keith R.; Lieberwirth, IngoIn this study, nZVI prepared by borohydride reduction was applied for the removal of Cu2+ ions under a variety of experimental conditions. The uptake experiments investigated the effects of initial concentration, contact time, pH, and repetitive loading on the extent of retardation of Cu2+ ions. Within the applied conditions, the sorbent demonstrated fast uptake kinetics and outstanding fixation abilities up to an initial Cu2+ concentration of 200.0 mg/L. Partitioning of Cu2+ ions between liquid and solid phases demonstrated an isotherm of L-type. Within the studied conditions, the capacity of uptake was found to be 250 mg of Cu2+ per g of nZVI. According to X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) results, Cu2+ ions were sorbed primarily via a redox mechanism that resulted in the formation of Cu2O and Cu0. The contact of iron nanoparticles with aqueous media caused extensive formation of iron oxide. However, the material did not completely lose its removal capacity and was repeatedly applied at low concentrations for further uptake trials.