Chemistry / Kimya
Permanent URI for this collectionhttps://hdl.handle.net/11147/4072
Browse
4 results
Search Results
Article Citation - WoS: 3Citation - Scopus: 4Lipid Bilayer on Wrinkled-Interfaced Graphene Field Effect Transistor(Elsevier Ltd., 2021) Özkendir İnanç, Dilce; Çelebi, Cem; Yıldız, Ümit HakanThis study describes lipid bilayer-based sensor interface on SiO2 encapsulated graphene field effect transistors (GFET). The SiO2 layer was utilized as a lipid compatible surface that drives bilayer formation. The two types of surface morphologies i) wrinkled morphology by thermal evaporation (TE) and ii) flat morphology by pulsed electron deposition (PED) were obtained. The sensing performance of wrinkled and flat interfaced-GFETs were investigated, pH sensitivity of wrinkled interfaced-GFETs were found to be ten fold larger than the flat ones. The enhanced sensitivity is attributed to thinning of the oxide layer by formation of wrinkles thereby facilitating electrostatic gating on graphene. We foresee that described wrinkled SiO2 interfaced-GFET holds promise as a cell membrane mimicking sensing platform for novel bioelectronic applications. © 2020Article Citation - WoS: 82Citation - Scopus: 92Metal Ion Release From Nitrogen Ion Implanted Cocrmo Orthopedic Implant Material(Elsevier Ltd., 2006) Öztürk, Orhan; Türkan, Uğur; Eroğlu, Ahmet EminCoCrMo alloys are used as orthopedic implant materials because of their excellent mechanical and corrosion properties. However, when placed in vivo, these alloys release Co, Cr, Mo ions to host tissues, which may give rise to significant health concerns over time. Nitrogen ion implantation can be used to form protective layers on the surface of CoCrMo orthopedic alloys by modifying the near surface layers of these materials. In this study, medical grade CoCrMo alloy (IS0 5832-12) was ion implanted with 60 keV nitrogen ions to a high dose of 1.9 × 10 18 ions/cm 2 at substrate temperatures of 100, 200 and 400 °C. The N implanted layer microstructures, implanted layer phases, and thicknesses were studied by a combination of Bragg-Brentano (θ/2θ) and grazing incidence (Seeman-Bohlin) X-ray diffraction (XRD and GIXRD) and cross-sectional scanning electron microscopy (SEM). Atomic force microscopy (AFM) was used for roughness analysis of N implanted as well as as-polished surfaces. Static immersion tests were performed to investigate metal ion release into simulated body fluid (SBF) by electrothermal atomic absorption spectrometry (ETAAS) and inductively coupled plasma optical emission spectrometry (ICP-OES). XRD and SEM analyses indicated that the N implanted layers were ∼ 150-450 nm thick and composed of the (Co,Cr,Mo) 2+xN nitride phase and a high N concentration Co-based FCC phase, γ N depending on the substrate temperature. ETAAS analysis results showed that in vitro exposure of the N implanted surfaces resulted in higher levels of cobalt ion release into the simulated body fluid compared to the untreated, polished alloy. The higher Co release from the N implanted specimens is attributed to the nature of the implanted layer phases as well as to the rougher surfaces associated with the N implanted specimens compared to the relatively smooth surface of the untreated material. SEM analysis of N implanted and untreated specimens after immersion tests clearly indicated calcium phosphate formation on the as-polished CoCrMo alloy, indicating a degree of bioactivity of the untreated metal surface which is absent in the N implanted specimens.Article Citation - WoS: 2Dimensions of Polystyrene Particles Deposited on Mica From Dilute Cyclohexane Solution at Different Temperatures(American Chemical Society, 2002) Demir, Mustafa Muammer; Erman, BurakUsing atomic force microscopy, the height, diameter, and volume of polystyrene particles deposited on mica from dilute cyclohexane solution at different temperatures are determined. Dimensions exhibit a strong temperature dependence. The heights of the deposited particles are only a few atomic diameters, the major dimension being parallel to the mica surface. The number of single polystyrene molecules in a deposited particle cannot be determined directly by atomic force microscopy. However, the maximum number of molecules that may be present in a particle may be estimated. Below 35 °C, the particles possibly consist of single collapsed molecules. This number increases with temperature and becomes as large as about 30 molecules per particle at 80 °C. The volume occupied by a single chain in solvent is calculated as a function of temperature and compared with observed volumes of dry particles on mica. A linear relationship is observed between single chain volumes in solvent and corresponding particle volumes on mica. On the average, the volume of a single chain in solution is 10 times the volume of a dry particle at the corresponding temperature. Fluctuations of chain volumes that are dominant in solution are also present in the volumes of particles deposited and dried on mica.Article Citation - WoS: 12Probing Nanoscale Domains of J-Aggregates Deposited on a Mica Surface(American Chemical Society, 2004) Demir, Mustafa Muammer; Özçelik, Serdar; Birkan, BurakJ-aggregates of 1,1′,3,3′-tetraethyl-5,5′,6,6′- tetrachlorobenzimidazolocarbocyanine (TTBC) were deposited on a mica surface and probed by atomic force microscopy operated at tapping mode in air. Optical spectra showed that J-aggregates were formed in aqueous solutions. Atomic force microscopy images revealed that J-aggregates deposited on mica surfaces mainly present single domains with a mean height of 2.00 ± 0.25 nm and an average diameter of 100 ± 20 nm. Quantitative analysis of the morphology of images indicated that the single domain of J-aggregates exhibits very uniform height and diameter distributions with polydispersity indices of 1.02 and 1.04, respectively. Based on the results, we propose a two-dimensional nanostructure in which TTBC J-aggregates could be arranged in a monolayer.