Chemistry / Kimya
Permanent URI for this collectionhttps://hdl.handle.net/11147/4072
Browse
5 results
Search Results
Article Citation - WoS: 15Citation - Scopus: 21Preparation, Characterization and Optimization of Chitosan Nanoparticles as Carrier for Immobilization of Thermophilic Recombinant Esterase(Taylor and Francis Ltd., 2011) İlgü, Hüseyin; Turan, Taylan; Şanlı Mohamed, GülşahImmobilization of biologically important molecules on myriad nano-sized materials has attracted great attention. Through this study, thermophilic esterase enzyme was obtained using recombinant DNA technology and purified applying one-step His-Select HF nickel affinity gel. The synthesis of chitosan was achieved from chitin by deacetylation process and degree of deacetylation was calculated as 89% by elemental analysis. Chitosan nanoparticles were prepared based on the ionic gelation of chitosan with tripolyphosphate anions. The physicochemical properties of the chitosan and chitosan nanoparticles were determined by several methods including SEM (Scanning Electron Microscopy), FT-IR (Fourier Transform Infrared Spectroscopy) and DLS (Dynamic Light Scattering). The morphology of chitosan nanoparticles was spherical and the nanospheres' average diameter was 75.3 nm. The purified recombinant esterase was immobilized efficiently by physical adsorption onto chitosan nanoparticles and effects of various immobilization conditions were investigated in details to develope highly cost-effective esterase as a biocatalyst to be utilized in biotechnological purposes. The optimal conditions of immobilization were determined as follows; 1.0 mg/mL of recombinant esterase was immobilized on 1.5 mg chitosan nanoparticles for 30 min at 60C, pH 7.0 under 100 rpm stirring speed. Under optimized conditions, immobilized recombinant esterase activity yield was 88.5%. The physicochemical characterization of enzyme immobilized chitosan nanoparticles was analyzed by SEM, FT-IR and AFM (Atomic Force Microscopy).Article Citation - WoS: 30Citation - Scopus: 30Glycidyl-Methacry Late-Based Electrospun Mats and Catalytic Silver Nanoparticles(John Wiley and Sons Inc., 2008) Demir, Mustafa Muammer; Uğur, Gökçe; Gülgün, Mehmet A.; Menceloğlu, Yusuf Z.P(AN-GMA) and PGMA fibers coated with monodisperse silver nanoparticles have been prepared by a combination of electrospinning and electroless plating. The morphology of the electrospun fibers remains unchanged after surface hydrazination. Oxidation of hydrazine in an ammoniacal solution of AgNO 3 reduces and deposits silver atoms along the fiber surface, which then coalesce to Ag particles. The size of the silver nanoparticles is varied between 20-60 nm. Since the density of the active sites for silver reduction is lower in P(AN-GMA), a smaller particle size could be obtained. The catalytic activity of the silver nanoparticles has been confirmed.Article Citation - WoS: 15Aggregation of Fillers Blended Into Random Elastomeric Networks: Theory and Comparison With Experiments(John Wiley and Sons Inc., 2006) Demir, Mustafa Muammer; Menceloğlu, Yusuf Ziya; Erman, BurakA theoretical model describing aggregation of filler particles in amorphous elastomers is proposed. The model is based on a counting technique originally used in genome analysis to characterize the size and distribution of overlapping segments randomly placed on a DNA molecule. In the present model, the particles are first assumed to aggregate randomly upon mixing into the elastomer and then-sizes are calculated. The sizes and distributions of aggregates are also studied in the presence of attractive interparticle forces. Results of the proposed model are compared with experimental data on silica-filled end-linked poly(dimethyl-siloxane) networks. Comparison of the theory and experiment shows that the random aggregation assumption where no attractive forces exist between the particles is not valid and a significant attraction between the silica particles is needed in the theory to justify the experimental data obtained using atomic force microscopy. For filler content below 1.45 vol.-%, the model agrees, qualitatively, with experiment and shows the increase in cluster size with increasing amount of filler. It also explains the increase in the dispersion of aggregate sizes with increasing amount of filler.Article Citation - WoS: 2Citation - Scopus: 2Composites of Reactive Silica Nanoparticles and Poly(glycidyl Methacrylate) With Linear and Crosslinked Chains by in Situ Bulk Polymerization(Taylor and Francis Ltd., 2010) Demir, Mustafa Muammer; Altın, Burcu; Özçelik, SerdarComposites of poly(glycidyl methacrylate) (PGMA) and L-lysine-coated silica nanoparticles with varying contents were prepared by in situ bulk polymerization using benzoyl peroxide (BPO) as free radical initiator. Silica nanoparticles covered by L-lysine molecules were synthesized using emulsion method. Dynamic light scattering measurements confirmed that the particles are highly monodisperse with the diameter of 10 nm and free of aggregates in the monomer (glycidyl methacrylate, GMA). Upon polymerization of the homogeneous particle/monomer dispersion, aggregates of individual silica nanoparticles are observed by tapping mode atomic force microscope (AFM). Amine and/or carboxylic acid sites on particle surface covalently react with the oxirane groups of the polymer backbone. The aggregation was substantially suppressed by using a difunctional comonomer divinyl benzene (DVB) in polymerization. A three-dimensional polymer network, P(GMA-DVB), forms throughout the system. This structure leads to significant progress in particle dispersion, therefore in physical properties of the resulting composite. We demonstrated that the composites prepared by crosslinked chains are thermally more stable and mechanically stiffer than those prepared by linear ones.Article Citation - WoS: 15Citation - Scopus: 15Controlling Spontaneous Emission of Cdse Nanoparticles Dispersed in Electrospun Fibers of Polycarbonate Urethane(American Chemical Society, 2009) Demir, Mustafa Muammer; Soysal, Duygu; Ünlü, Caner; Kuş, Mahmut; Özçelik, SerdarLuminescent fibrous composite films consisting of submicrometer diameter fibers were prepared by electrospinning of segmented polycarbonate urethane (PCU) in dimethyl formamide and tri-n-octylphosphine oxide (TOPO)-capped CdSe nanocrystals (5 nm in diameter) in toluene. Using a pair of conductive electrodes separated with an air gap, we successfully produced randomly deposited and uniaxially aligned electrospun fibers. The surface structure of the electrospun fibers was studied using atomic force microscopy (AFM) and was compared to the corresponding film prepared by casting. In cast film, tapping mode AFM imaging suggests that hard urethane segments organize into rodlike morphology dispersed in soft polycarbonate. When PCU/ CdSe dispersions were subjected to electrospinning, copolymer domains were forced to arrange into lamella along the fiber axis due to elongational flow and high stretching. Molecular orientation in the domains of the composite fibers was confirmed by polarized infrared spectroscopy. We demonstrated that formation of the oriented domains by electrospinning develops a hierarchical structure, which consequently modifies spectral properties because new multiple sharp lines appeared in the photoluminescence (PL) spectra of the fibers. In contrast to randomly deposited fibers, the PL intensity of uniaxially aligned fibers was found to be angle dependent. We propose that the elongated internal structure within the fibers controls the spontaneous emission of CdSe nanoparticles dispersed throughout the electrospun mat. A discussion on the nature of the controlled spontaneous emission is provided.