Bioengineering / Biyomühendislik
Permanent URI for this collectionhttps://hdl.handle.net/11147/4529
Browse
7 results
Search Results
Article Citation - Scopus: 3Development of Chrono-Spectral Gold Nanoparticle Growth Based Plasmonic Biosensor Platform(Elsevier, 2024) Sözmen, Alper Baran; Elveren, Beste; Erdoğan, Duygu; Mezgil, Bahadır; Baştanlar, Yalın; Yıldız, Ümit Hakan; Arslan Yıldız, AhuPlasmonic sensor platforms are designed for rapid, label-free, and real-time detection and they excel as the next generation biosensors. However, current methods such as Surface Plasmon Resonance require expertise and well-equipped laboratory facilities. Simpler methods such as Localized Surface Plasmon Resonance (LSPR) overcome those limitations, though they lack sensitivity. Hence, sensitivity enhancement plays a crucial role in the future of plasmonic sensor platforms. Herein, a refractive index (RI) sensitivity enhancement methodology is reported utilizing growth of gold nanoparticles (GNPs) on solid support and it is backed up with artificial neural network (ANN) analysis. Sensor platform fabrication was initiated with GNP immobilization onto solid support; immobilized GNPs were then used as seeds for chrono-spectral growth, which was carried out using NH2OH at varied incubation times. The response to RI change of the platform was investigated with varied concentrations of sucrose and ethanol. The detection of bacteria E.coli BL21 was carried out for validation as a model microorganism and results showed that detection was possible at 102 CFU/ml. The data acquired by spectrophotometric measurements were analyzed by ANN and bacteria classification with percentage error rates near 0% was achieved. The proposed LSPR-based, label-free sensor application proved that the developed methodology promises utile sensitivity enhancement potential for similar sensor platforms. © 2024 The Author(s)Article Citation - WoS: 9Citation - Scopus: 9Fabrication and Development of a Microfluidic Paper-Based Immunosorbent Assay Platform (μpisa) for Colorimetric Detection of Hepatitis C(Royal Society of Chemistry, 2023) Özefe, Fatih; Arslan Yıldız, AhuPaper-based microfluidics is an emerging analysis tool used in various applications, especially in point-of-care (PoC) diagnostic applications, due to its advantages over other types of microfluidic devices in terms of simplicity in both production and operation, cost-effectiveness, rapid response time, low sample consumption, biocompatibility, and ease of disposal. Recently, various techniques have been developed and utilized for the fabrication of paper-based microfluidics, such as photolithography, micro-embossing, wax and PDMS printing, etc. In this study, we offer a fabrication methodology for a microfluidic paper-based immunosorbent assay (μPISA) platform and the detection of Hepatitis C Virus (HCV) was carried out to validate this platform. A laser ablation technique was utilized to form hydrophobic barriers easily and rapidly, which was the major advantage of the developed fabrication methodology. The characterization of the μPISA platform was performed in terms of micro-channel properties using bright-field (BF) microscopy, and surface properties using scanning electron microscopy (SEM). At the same time, sample volume and liquid handling capacity were analyzed quantitatively. Ablation speed (S) and laser power (P) were optimized, and it was shown that one combination (10P60S) provided minimal deviation in micro-channel dimensions and prevented deterioration of hydrophobic barriers. Also, the minimum hydrophobic barrier width, which prevents cross-barrier bleeding, was determined to be 255.92 ± 10.01 μm. Furthermore, colorimetric HCV NS3 detection was implemented to optimize and validate the μPISA platform. Here, HCV NS3 in both PBS and human blood plasma was successfully detected by the naked eye at concentrations as low as 1 ng mL−1 and 10 ng mL−1, respectively. Moreover, the limit of detection (LoD) values for HCV NS3 were acquired as 0.796 ng mL−1 in PBS and 2.203 ng mL−1 in human blood plasma with a turnaround time of 90 min. In comparison with conventional ELISA, highly sensitive and rapid HCV NS3 detection was accomplished colorimetrically on the developed μPISA platform.Article Citation - WoS: 4Citation - Scopus: 6Rational Design of Thermophilic Cyp119 for Progesterone Hydroxylation by in Silico Mutagenesis and Docking Screening(Elsevier, 2023) Kestevur Doğru, Ekin; Güralp, Gülce; Uyar, Arzu; Sürmeli, Nur BaşakSteroid-based chemicals can affect the metabolism, immune functions, and development of sexual characteristics. Because of these effects, steroid derivatives are widely used in the pharmaceutical industry. Progesterone is a steroid-based hormone that mainly controls the ovulation period of women but is also a precursor molecule for the synthesis of important hormones like testosterone and cortisone. Cytochrome P450 (CYP) enzymes are important for the production of hydroxyprogesterones in the industry since they can catalyze regio- and enantioselective hydroxylation reactions. Although human CYP enzymes can catalyze hydroxyprogesterone synthesis with high selectivity, these enzymes are membrane bound, which limits their application for industrial production. CYP119 is a soluble and thermophilic enzyme from the archaea Sulfolobus acidocaldarius. Even though the native substrate of the enzyme is not known, CYP119 can catalyze styrene epoxidation, lauric acid hydroxylation, and Amplex®Red peroxidation. In this work, an in silico mutagenesis approach was used to design CYP119 mutants with high progesterone affinity. Energy scores of progesterone docking simulations were used for the design and elimination of single, double, and triple mutants of CYP119. Among designed 674 mutants, five of them match the criteria for progesterone hydroxylation. The most common mutation of these five mutants, L69G mutant was analyzed using independent molecular dynamics (MD) simulations in comparison with the wild-type (WT) enzyme. L69G CYP119, was expressed and isolated from Escherichia coli; it showed 800-fold higher affinity for progesterone compared to WT CYP119. L69G CYP119 also catalyzed progesterone hydroxylation. The novel designed enzyme L69G CYP119 is a potential versatile biocatalyst for progesterone hydroxylation that is expected to be stable under industrial production conditions.Article Citation - WoS: 7Citation - Scopus: 7Connexin 32 Overexpression Increases Proliferation, Reduces Gap Junctional Intercellular Communication, Motility and Epithelial-To Transition in Hs578t Breast Cancer Cells(Springer, 2022) Uğur, Deniz; Güngül, Taha Buğra; Yücel, Simge; Özçivici, Engin; Yalçın Özuysal, Özden; Meşe Özçivici, GülistanConnexins (Cx) are primary components of gap junctions that selectively allow molecules to be exchanged between adjacent cells, regulating multiple cellular functions. Along with their channel forming functions, connexins play a variety of roles in different stages of tumorigenesis and their roles in tumor initiation and progression is isoform- and tissue-specific. While Cx26 and Cx43 were downregulated during breast tumorigenesis, Cx32 was accumulated in the cytoplasm of the cells in lymph node metastasis of breast cancers and Cx32 was further upregulated in metastasis. Cx32's effect on cell proliferation, gap junctional communication, hemichannel activity, cellular motility and epithelial-to-mesenchymal transition (EMT) were investigated by overexpressing Cx32 in Hs578T and MCF7 breast cancer cells. Additionally, the expression and localization of Cx26 and Cx43 upon Cx32 overexpression were examined by Western blot and immunostaining experiments, respectively. We observed that MCF7 cells had endogenous Cx32 while Hs578T cells did not and when Cx32 was overexpressed in these cells, it caused a significant increase in the percentages of Hs578T cells at the S phase in addition to increasing their proliferation. Further, while Cx32 overexpression did not induce hemichannel activity in either cell, it decreased gap junctional communication between Hs578T cells. Additionally, Cx32 was mainly observed in the cytoplasm in both cells, where it did not form gap junction plaques but Cx32 overexpression reduced Cx43 levels without affecting Cx26. Moreover, migration and invasion potentials of Hs578T and migration in MCF7 were reduced upon Cx32 overexpression. Finally, the protein level of mesenchymal marker N-cadherin decreased while epithelial marker ZO-1 and E-cadherin increased in Hs578T cells. We observed that Cx32 overexpression altered cell proliferation, communication, migration and EMT in Hs578T, suggesting a tumor suppressor role in these cells while it had minor effects on MCF7 cells.Article Citation - WoS: 17Citation - Scopus: 22Protein Corona Formation on Silver Nanoparticles Under Different Conditions(Elsevier, 2022) Tomak, Aysel; Yılancıoğlu, Buket; Winkler, David; Öksel Karakuş, CeydaThe surfaces of nanoparticles become covered by biomolecules in biological fluids. This protein ‘corona’ modifies materials’ characteristics and biological activity. The composition of the protein corona is dynamic, abundant biomolecules that bind first are subsequently replaced by less abundant but more tightly bound ones. Here, we explore the formation of the silver nanoparticle protein corona on exposure to cell culture media containing 10 % fetal bovine serum supplemented Dulbecco's Modified Eagle's medium. Sodium dodecyl-sulfate polyacrylamide gel electrophoresis and liquid chromatography-mass spectrometry/mass spectrometry analysis were used to monitor how different parameters such as incubation time, heating duration, cell culture medium, incubation temperature, and the number of washes affect the nanoparticle–protein corona complex. silver nanoparticles with and without bound proteins were characterized by electron microscopy, dynamic light scattering, and ultraviolet-visible-near-IR spectroscopy. The tetrazolium-based MTT assay was used to determine viability of A549 human lung adenocarcinoma cells treated with silver nanoparticles. Characterization of the nanoparticles before and after protein binding provided insights into their changing morphology on corona formation. Our results confirmed that the physiological environment directly affects protein corona formation on nanoparticle surfaces. In particular, incubation condition-dependent differences in the amount of bound proteins were observed. This work highlights the importance of environmental drivers of protein adsorption, which should be considered when predicting and/or controlling protein targets of silver nanoparticles.Article Citation - WoS: 8Citation - Scopus: 9Optimization of the Algal Species Chlorella Miniata Growth: Mathematical Modelling and Evaluation of Temperature and Light Intensity Effects(Elsevier, 2022) Sözmen, Alper Baran; Ata, Ayça; Övez, BikemGrowth of Chlorella miniata, a green microalga was investigated during this study under various temperature and light intensity values with the purpose of determining growth rate changes of the microalgae with cultivation parameters, experiments were carried out using airlift photobioreactors with a study volume of 6 L. Culturing conditions were between 66 and 385 μmol photon m−2 s−1 and between 14 and 30 °C for light intensity and ambient temperature, respectively. Acquired data were then used to test various mathematical models for coherency with experimental results. Aiba Model for light intensity and Skewed Normal Distribution Model for temperature parameters performed superior compared to the rest of the mathematical models used during the study. Utilizing both mathematical models a novel model was deduced to express effects of both light intensity and temperature parameters in combination on algal growth. Then the developed model was used to calculate the optimum growth condition of the species. The proposed mathematical model showed good coherency with experimental data and an average relative error of 1.97% for both temperature and light intensity effects on algal growth. The theoretical optimum temperature and light intensity for the maximum specific growth rate were calculated to be 22.43 °C and 291.5 μmol photon m−2 s−1 respectively.Article Citation - WoS: 46Citation - Scopus: 46Thiolene- and Polycaprolactone Methacrylate-Based Polymerized High Internal Phase Emulsion (polyhipe) Scaffolds for Tissue Engineering(American Chemical Society, 2022) Aldemir Dikici, Betül; Malayeri, Atra; Sherborne, Colin; Dikici, Serkan; Paterson, Thomas; Dew, Lindsey; Claeyssens, FrederikHighly porous emulsion templated polymers (PolyHIPEs) provide a number of potential advantages in the fabrication of scaffolds for tissue engineering and regenerative medicine. Porosity enables cell ingrowth and nutrient diffusion within, as well as waste removal from, the scaffold. The properties offered by emulsion templating alone include the provision of high interconnected porosity, and, in combination with additive manufacturing, the opportunity to introduce controlled multiscale porosity to complex or custom structures. However, the majority of monomer systems reported for PolyHIPE preparation are unsuitable for clinical applications as they are nondegradable. Thiol-ene chemistry is a promising route to produce biodegradable photocurable PolyHIPEs for the fabrication of scaffolds using conventional or additive manufacturing methods; however, relatively little research has been reported on this approach. This study reports the groundwork to fabricate thiol- and polycaprolactone (PCL)-based PolyHIPE materials via a photoinitiated thiolene click reaction. Two different formulations, either three-arm PCL methacrylate (3PCLMA) or four-arm PCL methacrylate (4PCLMA) moieties, were used in the PolyHIPE formulation. Biocompatibility of the PolyHIPEs was investigated using human dermal fibroblasts (HDFs) and human osteosarcoma cell line (MG-63) by DNA quantification assay, and developed PolyHIPEs were shown to be capable of supporting cell attachment and viability.