PubMed İndeksli Yayınlar Koleksiyonu / PubMed Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7645
Browse
7 results
Search Results
Now showing 1 - 7 of 7
Article Valorization of Recycled Waste in Green/White Purification and LC-QTOF/MS Analysis of Beverages Adulterated with Incapacitating Drugs(Elsevier B.V., 2026) Anilanmert, Beril; Yonar, Fatma Cavus; Er, Elif Ozturk; Pekcaliskan, Elif Yılmaz; Cengiz, SalihIncapacitating drugs constitute a growing threat for the community, since victims may drink adulterated beverages without noticing. A validated eco-friendly/economical purification/analysis kit prototype, along with an LC-QToF/MS method has been developed in coke and mixed fruit-juice, for simultaneous determination of 10 drugs used for incapacitating victims (zaleplone, zolpidem, zopiclone, mephedrone, fentanyl, phenytoin, thiopental, sertraline, ketamine and GHB). A combination of two different waste nut-shells which yielded the highest recovery for these drugs were directly used as adsorbent after grinding and modification and a reusable separation apparatus recycled from waste were utilized for the first time in a toxicological analysis. In the method, after adding the adsorbent on to the sample, pH was adjusted. Following 25-min (min) automatic vortexing for adsorption, matrix was removed easily, using the separation apparatus. After 25-min desorption via cold ultrasonication using 500 μL methanol, a 9.5-min LC-QToF/MS analysis was performed. The validated method in fruit-juice and coke, extraordinarily gave successful results also in urine and saliva. Assessment tools for greenness/whiteness and pictograms confirmed the environmental friendliness of the method kit. © 2025 Elsevier B.V.Article A Simplified Molecular Imprinting Strategy Through Electrospinning of Polyacrylonitrile for Thin Film Microextraction of Selected Pesticides(Elsevier B.V., 2026) Şahin, A.; Akpinar, Y.; Yildirim, E.; Eroǧlu, A.E.; Boyaci, E.Molecularly imprinted polymers (MIPs) have been extensively used as selective extractive phases for sample preparation because of their analyte-selective binding sites. However, MIP preparation requires optimized monomer-template interactions and long polymerization reactions. In this study, a novel and simple method of MIP preparation was proposed based on electrospinning. Instead of preparing analyte-monomer complexes before polymerization, model analytes (trifluralin and carbaryl) were directly dissolved in a polyacrylonitrile (PAN) solution, then electrospun into nanofibrous mats. This allowed for a means of preparation of highly crystalline, template-imprinted nanostructures with minimal synthetic complexity. Following the characterization studies for the new material, the extraction properties of the imprinted and nonimprinted electrospun mats were investigated in thin film microextraction (TFME) studies by extracting trifluralin and carbaryl from water samples, followed by gas chromatography-mass spectrometry (GC–MS) analysis. The optimization results showed that samplers containing 10.0 mg of MIP sorbents made by electrospinning of a solution containing 5.0 mg of template in 1.0 mL of PAN solution resulted in approximately 4 and 7 times enhanced extraction recoveries for carbaryl and trifluralin compared to samplers made of non-imprinted bulk PAN. Moreover, the cross-reactivity testing performed with non-template analytes (malathion and diazinon) suggested a more specific extraction towards trifluralin compared to carbaryl. The proposed new technique was also validated using computational methodology, which supported the experimental finding about higher selectivity towards trifluralin. This may signify a probability for structural orientation of partially charged trifluralin under an electrical field in electrospun PAN creating favorable extraction sites. © 2025 Elsevier B.V.Article Citation - WoS: 4Citation - Scopus: 4Novel Electrospun-Based Extractive Probes for Rapid Determination of Clinically Important Compounds in Human Plasma(Elsevier B.V., 2024) Temel,E.R.; Eroğlu,A.E.; Salih,B.; Boyaci,E.Background: Coated blade spray (CBS) represents an innovative approach that utilizes solid-phase microextraction principles for sampling and sample preparation. When combined with ambient mass spectrometry (MS), it can also serve as an electrospray ionization source. Therefore, it became a promising tool in analytical applications as it can significantly reduce the analysis time. However, the current CBS coatings are based on the immobilization of extractive particles in bulk polymeric glue, which constrains the diffusion of the analytes to reach the extractive phase; therefore, the full reward of the system cannot be taken at pre-equilibrium. This has sparked the notion of developing new CBS probes that exhibit enhanced kinetics. Results: With this aim, to generate a new extractive phase with improved extraction kinetics, poly(divinylbenzene) (PDVB) nanoparticles were synthesized by mini-emulsion polymerization and then immobilized into sub-micrometer (in diameter) sized polyacrylonitrile fibers which were obtained by electrospinning method. Following the optimization and characterization studies, the electrospun-coated blades were used to determine cholesterol, testosterone, and progesterone in plasma spots using the CBS-MS approach. For testosterone and progesterone, 10 ng mL−1 limits of quantification could be obtained, which was 200 ng mL−1 for cholesterol in spot-sized samples without including any pre-treatment steps to samples prior to extraction. Significance: The comparison of the initial kinetics for dip-coated and electrospun-coated CBS probes proved that the electrospinning process could enhance the extraction kinetics; therefore, it can be used for more sensitive analyses. The total analysis time with this method, from sample preparation to instrumental analysis, takes only 7 min, which suggests that the new probes are promising for fast diagnostic applications. © 2024 Elsevier B.V.Article Citation - WoS: 10Citation - Scopus: 11Arabinoxylan-Based Psyllium Seed Hydrocolloid: Single-Step Aqueous Extraction and Use in Tissue Engineering(Elsevier B.V., 2024) Yildirim-Semerci,Ö.; Bilginer-Kartal,R.; Arslan-Yildiz,A.Biomacromolecules derived from natural sources offer superior biocompatibility, biodegradability, and water-holding capacity, which make them promising scaffolds for tissue engineering. Psyllium seed has gained attention in biomedical applications recently due to its gel-forming ability, which is provided by its polysaccharide-rich content consisting mostly of arabinoxylan. This study focuses on the extraction and gelation of Psyllium seed hydrocolloid (PSH) in a single-step water-based protocol, and scaffold fabrication using freeze-drying method. After characterization of the scaffold, including morphological, mechanical, swelling, and protein adsorption analyses, 3D cell culture studies were done using NIH-3 T3 fibroblast cells on PSH scaffold, and cell viability was assessed using Live/Dead and Alamar Blue assays. Starting from day 1, high cell viability was obtained, and it reached 90 % at the end of 15-day culture period. Cellular morphology on PSH scaffold was monitored via SEM analysis; cellular aggregates then spheroid formation were observed throughout the study. Collagen Type-I and F-actin expressions were followed by immunostaining revealing a 9- and 10-fold increase during long-term culture. Overall, a single-step and non-toxic protocol was developed for extraction and gelation of PSH. Obtained results unveiled that PSH scaffold provided a favorable 3D microenvironment for cells, holding promise for further tissue engineering applications. © 2024 Elsevier B.V.Review Citation - WoS: 5Citation - Scopus: 5Development and Functionalization of Electrospun Fiber Coated Thin Film Microextraction Devices for Rapid Mass Spectrometric Determination of Biologically Important Polar Molecules(Elsevier B.V., 2024) Öztürk,M.; Salih,B.; Eroğlu,A.E.; Boyaci,E.Rapid diagnosis of diseases is one of the challenging areas in clinical research. From the analytical chemist's perspective, the main challenges are isolating the compounds from the bio-specimen and lengthy analysis times. In this regard, solid phase microextraction offers a platform to address the abovementioned challenges. Moreover, its sharp tip-thin film geometry, known as coated blade spray (CBS), can enhance the extraction and act as an ionization source in direct mass spectrometric analysis. In this study, a new CBS device specifically designed for polar analytes was prepared and optimized to determine urinary metabolites. For this purpose, polyacrylonitrile (PAN) was selected as a base polymer as it can be electrospun to form a nanofibrous structure, and it can be modified with weak ion exchange moieties to interact with polar analytes. Following the electrospinning of PAN, hydrolysis was optimized, and conditions leading to sufficient extraction enhancement without dissolving the polymer were obtained when probes were treated with 5.0 M of NaOH for 2.5 h. Using the coated blades prepared as explained, the evaluation of various extraction conditions showed that 5 min is sufficient for equilibrium extraction. In addition, the solution's ionic strength and pH significantly affect the extraction. Optimum sorption was obtained at no salt added and pH 7.0 conditions. The CBS-MS optimization showed that 10.0 µL of ACN/MeOH/H2O (40:40:20, v/v/v) with formic acid kept for 15 seconds on the blade before voltage application leads to the highest signal. The limits of quantification of the analytes are between 50 and 100 ng/mL. © 2024 Elsevier B.V.Article Citation - WoS: 2Citation - Scopus: 2Small Angle X-Ray Scattering Analysis of Thermophilic Cytochrome P450 Cyp119 and the Effects of the N-Terminal Histidine Tag(Elsevier B.V., 2024) Doğru,E.K.; Sakallı,T.; Liu,G.; Sayers,Z.; Surmeli,N.B.Combining size exclusion chromatography-small angle X-ray scattering (SEC-SAXS) and molecular dynamics (MD) analysis is a promising approach to investigate protein behavior in solution, particularly for understanding conformational changes due to substrate binding in cytochrome P450s (CYPs). This study investigates conformational changes in CYP119, a thermophilic CYP from Sulfolobus acidocaldarius that exhibits structural flexibility similar to mammalian CYPs. Although the crystal structure of ligand-free (open state) and ligand-bound (closed state) forms of CYP119 is known, the overall structure of the enzyme in solution has not been explored until now. It was found that theoretical scattering profiles from the crystal structures of CYP119 did not align with the SAXS data, but conformers from MD simulations, particularly starting from the open state (46 % of all frames), agreed well. Interestingly, a small percentage of closed-state conformers also fit the data (9 %), suggesting ligand-free CYP119 samples ligand-bound conformations. Ab initio SAXS models for N-His tagged CYP119 revealed a tail-like unfolded structure impacting protein flexibility, which was confirmed by in silico modeling. SEC-SAXS analysis of N-His CYP119 indicated pentameric structures in addition to monomers in solution, affecting the stability and activity of the enzyme. This study adds insights into the conformational dynamics of CYP119 in solution. © 2024 Elsevier B.V.Article Citation - WoS: 5Citation - Scopus: 6Fabrication of Gelatin-Polyester Based Biocomposite Scaffold Via One-Step Functionalization of Melt Electrowritten Polymer Blends in Aqueous Phase(Elsevier B.V., 2024) Köksal,B.; Kartal,R.B.; Günay,U.S.; Durmaz,H.; Yildiz,A.A.; Yildiz,Ü.H.The rapid manufacturing of biocomposite scaffold made of saturated-Poly(ε-caprolactone) (PCL) and unsaturated Polyester (PE) blends with gelatin and modified gelatin (NCO-Gel) is demonstrated. Polyester blend-based scaffold are fabricated with and without applying potential in the melt electrowriting system. Notably, the applied potential induces phase separation between PCL and PE and drives the formation of PE rich spots at the interface of electrowritten fibers. The objective of the current study is to control the phase separation between saturated and unsaturated polyesters occurring in the melt electro-writing process and utilization of this phenomenon to improve efficiency of biofunctionalization at the interface of scaffold via Aza-Michael addition reaction. Electron-deficient triple bonds of PE spots on the fibers exhibit good potential for the biofunctionalization via the aza-Michael addition reaction. PE spots are found to be pronounced in which blend compositions are PCL-PE as 90:10 and 75:25 %. The biofunctionalization of scaffold is monitored through C[sbnd]N bond formation appeared at 400 eV via X-ray photoelectron spectroscopy (XPS) and XPS chemical mapping. The described biofunctionalization methodology suggest avoiding use of multi-step chemical modification on additive manufacturing products and thereby rapid prototyping of functional polymer blend based scaffolds with enhanced biocompatibility and preserved mechanical properties. Additionally one-step additive manufacturing method eliminates side effects of toxic solvents and long modification steps during scaffold fabrication. © 2024 Elsevier B.V.