Food Engineering / Gıda Mühendisliği

Permanent URI for this collectionhttps://hdl.handle.net/11147/12

Browse

Filters

2004 - 200992010 - 201952020 - 20231

Settings

Start date: 2000Department: search.filters.department.İzmir Institute of Technology. Chemical Engineering

Search Results

Now showing 1 - 10 of 15
  • Research Project
  • Article
    Citation - WoS: 6
    Citation - Scopus: 7
    Designing Robust Xylan/Chitosan Composite Shells Around Drug-Loaded Msns: Stability in Upper Git and Degradation in the Colon Microbiota
    (Elsevier, 2023) Zeybek, Nüket; Büyükkileci, Ali Oğuz; Güleç, Şükrü; Polat, Mehmet; Polat, Hürriyet
    ong residence times, near-neutral pH values, and release triggered by the enzymatic action of the resident microbiota offer unique opportunities for improved drug delivery in the colon. The fact that a delivery agent must also pass through the complete GI tract without degradation presents a challenge due to widely changing pH conditions. In this study, a promising colon-targeted drug delivery system was composed of a xylan/chitosan composite shell formed on curcumin-loaded mesoporous silica nanoparticles (MSNs). A novel synthesis approach was employed to facilitate precipitation of negatively charged xylan on negatively charged MSNs by concurrent chitosan polymerization. Curcumin-loaded xylan/chitosan-coated MSNs (C-MSNs) were determined to contain nearly 42% xylan by the inclusion of chitosan in a one-to-one ratio with xylan. The xylan/chitosan composite shell demonstrated excellent stability in the acidic upper GI tract. The hydrolysis of glycosidic bonds by resident microbiota was the triggering mechanism for xylan degradation and curcumin release in the colon. The presence of xylan has the further benefit of increasing the number of beneficial bacteria and improving short-chain fatty acid production for improved colon health.
  • Article
    Citation - WoS: 16
    Citation - Scopus: 15
    Characterization of Silk Fibroin Based Films Loaded With Rutin-Ss Inclusion Complexes
    (Kluwer Academic Publishers, 2014) Şamlı, Merve; Bayraktar, Oğuz; Korel, Figen
    In this study, cyclodextrin inclusion complexes with rutin were prepared via co-precipitation method. Stability constant and solubility energy of beta-cyclodextrin complex were calculated as 262 M-1 and 1,737 kJ mol-1, respectively. Aqueous solubility of rutin was increased with inclusion complex of beta-cyclodextrin. The effect of temperature on both aqueous solubility of free rutin, and its inclusion complex was also studied. Characterization of cyclodextrin complexes were conducted with UV-Vis spectrophotometry, Fourier transform infrared spectroscopy, X-ray diffractometry, differential scanning calorimetry, thermal gravimetric analysis, nuclear magnetic resonance spectroscopy and scanning electron microscopy techniques. Characterization results supported formation of inclusion complexes. Dissolution profiles of rutin, physical mixture and inclusion complex of rutin were observed at 37 °C. Dissolution results proved the effect of cyclodextrin addition on solubility rate of rutin. After loading rutin and its complexes into silk fibroin based films, release tests were performed at 37 °C in neutral pH conditions for 24 h. Most of the rutin were released from silk fibroin films within the first 5 h and the rest of it was released slowly (sustained release). Electron microscope analyses showed that films had homogenous and dense morphologies. These results revealed that silk fibroin is useful for preparing bioactive films loaded with natural compounds and for modifying their release behaviour at physiological conditions.
  • Article
    Citation - WoS: 153
    Citation - Scopus: 192
    Development of Cellulose Acetate Based Antimicrobial Food Packaging Materials for Controlled Release of Lysozyme
    (Elsevier Ltd., 2009) Gemili, Seyhun; Yemenicioğlu, Ahmet; Alsoy Altınkaya, Sacide
    Antimicrobial packaging materials were obtained by incorporation of lysozyme into cellulose acetate (CA) films. In order to achieve controlled release of lysozyme, the structure of the films was changed from highly asymmetric and porous to dense by modulating the composition of the initial casting solution. The highest release rate, soluble lysozyme activity and antimicrobial activity were obtained with the film prepared from 5% CA solution including 1.5% lysozyme. Increasing CA content in the casting solution decreased the porosity of the films, hence, reduced the release rate, maximum released lysozyme activities and the antimicrobial activities of the films. In contrast, immobilized lysozyme activities and the tensile strength of the films increased. The incorporation of lysozyme did not cause significant reductions in tensile strength and elongation at break values except in films prepared with 15% CA. This study showed the good potential of asymmetric CA films to achieve controlled release in antimicrobial packaging.
  • Article
    Citation - WoS: 87
    Citation - Scopus: 111
    Development of Antioxidant Food Packaging Materials With Controlled Release Properties
    (Elsevier Ltd., 2010) Gemili, Seyhun; Yemenicioğlu, Ahmet; Alsoy Altınkaya, Sacide
    In this study, cellulose acetate (CA) films with different morphological features were prepared in order to control the release rates of low molecular weight natural antioxidants, L-ascorbic acid and L-tyrosine. Increasing CA content in the casting solution decreased the average pore size and porosity of the films, thus, reduced the diffusion rates of both antioxidants through the films. Although both antioxidants have similar molecular weights, L-tyrosine released into water much more slowly than L-ascorbic acid. The highest antioxidant activity in release test solutions was observed with highly porous L-tyrosine containing films. However, when the porosity of the films reduced, the antioxidant activity of L-ascorbic acid released into solution was found to be higher due to trapping of significant amount of L-tyrosine in dense films. The use of different antioxidants caused different changes in morphological and mechanical properties of the CA films. Varying the structural features of the films with the preparation conditions or using different surfaces of the films allowed the controlled release of each antioxidant. © 2009 Elsevier Ltd. All rights reserved.
  • Article
    Citation - WoS: 105
    Citation - Scopus: 133
    Water Vapor and Oxygen-Barrier Performance of Corn-Zein Coated Polypropylene Films
    (Elsevier Ltd., 2010) Tıhmınlıoğlu, Funda; Atik, İsa Doğan; Özen, Banu
    A novel corn-zein coating structure on polypropylene (PP) films was developed to examine its feasibility as an alternative water vapor and oxygen-barrier for flexible packaging industry. The barrier properties of the resulting films were evaluated as affected by coating formulation (solvent, corn-zein, plasticizer concentration and plasticizer type). Corn-zein with different amounts (5% and 15%) was dissolved in 70% and 95% aqueous ethanol solution at 50 °C, respectively. Solutions of corn-zein plasticized by polyethylene glycol (PEG) and glycerol (GLY) with various levels (20% and 50%) were applied on corona-discharged-treated PP by using solvent-casting method. The significant improvements in water vapor and oxygen-barrier properties of uncoated PP films were obtained with corn-zein coating. Water vapor permeability (WVP) of the coated films decreased significantly with increasing corn-zein concentration. The application of plasticized corn-zein coating on PP films showed nearly more than three order of reduction in oxygen permeability (OP). The high water vapor and oxygen-barriers were obtained for films coated with coating formulation consisting of higher amounts of corn-zein plasticized by GLY. The statistical analysis defined the key parameters of coating formulation that had major effect on the final properties of coated PP films as corn-zein, plasticizer concentration, and plasticizer type. © 2009 Elsevier Ltd. All rights reserved.
  • Article
    Citation - WoS: 13
    Citation - Scopus: 18
    Effect of Corn-Zein Coating on the Mechanical Properties of Polypropylene Packaging Films
    (John Wiley and Sons Inc., 2011) Tıhmınlıoğlu, Funda; Atik, İsa Doğan; Özen, Banu
    In this study, a novel film structure of corn zein coated on polypropylene (PP) synthetic films for food packaging applications was developed, and the mechanical properties of the resulting coated film, as affected by the coating formulation, were investigated. Composite structures of PP films coated with corn zein were obtained through a simple solvent casting method. Different amounts of corn zein (5 and 15%) were dissolved in 70 and 95% aqueous ethanol solution at 50 C. Solutions of corn zein plasticized with poly(ethylene glycol) and glycerol (GLY) at various levels (20 and 50%) were applied on corona-discharge-treated PP. A statistical analysis based on full factorial design was performed to examine the influence of the coating formulation on the final properties of the corn-zein-coated PP films. A significant (p < 0.05) improvement in the coated film’s mechanical properties was observed compared to those of the uncoated PP. The effect of the plasticization of the coating solutions was also quite significant. In general, GLY provided better improvements in the mechanical properties of the corn-zein-coated PP films. The statistical analysis of the results showed that the corn-zein and plasticizer concentrations and plasticizer type used in the coating formulations were more effective parameters and had significant effects on the mechanical behavior of the coated PP films. In conclusion, corn-zein coatings could have potential as alternatives to conventional synthetic polymers used in composite multilayer structures for food packaging applications.
  • Article
    Citation - WoS: 46
    Citation - Scopus: 52
    Effect of Enzyme Location on Activity and Stability of Trypsin and Urease Immobilized on Porous Membranes by Using Layer-By Self-Assembly of Polyelectrolyte
    (Elsevier Ltd., 2010) Guedidi, Sadika; Yürekli, Yılmaz; Deratani, André; Déjardin, Philippe; Innocent, Christophe; Alsoy Altınkaya, Sacide; Roudesli, Sadok; Yemenicioğlu, Ahmet
    The layer-by-layer (LbL) self-assembly of polyelectrolyte is one of the simplest ways to immobilize enzyme on membrane. In this paper, the immobilization of trypsin (TRY) and urease (URE) on polyacrylonitrile based membranes using the LbL assembly technique was presented. The studied systems consisted in bilayered assemblies with the enzyme layer as the outer layer and trilayered assemblies with the enzyme layer as the inner sandwiched layer. The membrane pore size was chosen so that the smaller enzyme TRY was mainly immobilized within the membrane and confined in the porous membrane structure while URE immobilization mainly took place at the membrane surface. No dramatic difference on reactivity was evidenced between these two enzyme locations. The catalytic activity of immobilized enzymes was found to be lower than the free ones in solution but their stability was dramatically enhanced. The higher activity was observed when the enzyme is deposited as the outer layer of the LbL assembly. On the other hand, the more stable catalytic membranes were obtained when the outer layer consists of a polyelectrolyte covering the enzyme layer. © 2010 Elsevier B.V.
  • Article
    Citation - WoS: 11
    Citation - Scopus: 13
    Water Vapour Barrier Performance of Corn-Zein Coated Polypropylene (pp) Packaging Films
    (Springer Verlag, 2008) Atik, İsa Doğan; Özen, Fatma Banu; Tıhmınlıoğlu, Funda
    The novel film structure of corn-zein coated on polypropylene (PP) synthetic film for packaging industry was developed to examine the feasibility of resulting coated films as an alternative water barrier performance for food packaging. The effects of coating formulation (solvent, corn-zein, plasticizer concentration and plasticizer type) on final properties of films were observed. Corn-zein is the most important protein of corn and has good film forming property. Composites structures of PP films coated with corn-zein were obtained through a simple solvent casting method. Polyethylene glycol (PEG) and glycerol (GLY) were used as plasticizer to increase film flexibility. Statistical analysis based on full factorial design was performed to observe coating formulation effects. The high water vapour barriers were obtained for films coated with coating formulation consisting of higher amounts of corn-zein plasticized by GLY. The lower glass transition temperatures (T g) of films were obtained by plasticization of films and T g decreased by increasing plasticizer content. The statistical analysis defined the key parameters of coating formulation that had major effects on the final properties of coated PP films as corn-zein, plasticizer concentration and plasticizer type. In conclusion, corn-zein coatings could have potential as an alternative to conventional synthetic polymers used in composite multilayer structures for food packaging applications.
  • Article
    Citation - WoS: 21
    Citation - Scopus: 32
    Separation of Whey Components by Using Ceramic Composite Membranes
    (Elsevier Ltd., 2006) Erdem, İlker; Çiftçioğlu, Muhsin; Harsa, Hayriye Şebnem
    Ceramic supports were prepared from alumina powder and dip-coated with zirconia sol. The ceramic composite membranes prepared were characterized with respect to their microstructure/pore structures. The supports were 40% porous of which 87% were open pores. The average particle size of the sol particles was 35 nm. The prepared membrane has good protein lactose separation properties with a relatively high protein content (PR ∼80%) and with relatively low lactose retention (LR ∼7%). The permeate flux value was around 40 l/m2h. These results indicate the possibility of the preparation of ceramic composite membranes for separation of whey components with higher yields.