Food Engineering / Gıda Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/12
Browse
19 results
Search Results
Now showing 1 - 10 of 19
Article Citation - WoS: 15Citation - Scopus: 16Formulation of Gluten-Free Cookies Utilizing Chickpea, Carob, and Hazelnut Flours Through Mixture Design(MDPI, 2023) Doğruer, Ilgın; Başer, Filiz; Güleç, Şükrü; Tokatlı, Figen; Özen, BanuLegume flours, which offer high nutritional quality, present viable options for gluten-free bakery products. However, they may have an objectionable flavor and taste for some consumers. In this study, it was aimed to improve the gluten-free cookie formulation by incorporating carob and hazelnut flours to pre-cooked chickpea flour and to investigate the techno-functional properties of the formulated cookies. The flours used in the formulations were assessed for their chemical and physical properties. This study employed a mixture design (simplex-centroid) to obtain the proportions of the flours to be used in the cookie formulations. The rheological characteristics of the doughs and the technological attributes of the baked cookies were determined. The addition of the hazelnut and carob flours had the overall effect of reducing the rheological characteristics of the cookie doughs. Furthermore, the textural attribute of the hardness of the baked cookies decreased as the ratio of hazelnut flour in the formulations was raised. The analysed results and sensory evaluation pointed to a formulation consisting of 30% pre-cooked chickpea/30% carob/30% hazelnut flours, which exhibited improved taste and overall acceptability scores. A total of 16.82 g/100 g of rapidly digestible starch, 5.36 g/100 g of slowly digestible starch, and 8.30 g/100 g of resistant starch exist in this particular cookie. As a result, combinations of chickpea, hazelnut, and carob flours hold promise as good alternatives for gluten-free cookie ingredients and warrant further exploration in the development of similar products.Article Citation - WoS: 16Citation - Scopus: 17Techno-Functional and in Vitro Digestibility Properties of Gluten-Free Cookies Made From Raw, Pre-Cooked, and Germinated Chickpea Flours(MDPI, 2023) Doğruer, Ilgın; Çoban, Başak; Başer, Filiz; Güleç, Şükrü; Özen, BanuChickpea flour, which is produced in various forms, has high protein and fiber content; therefore, it can be a good ingredient for gluten-free cookies. The objective of this study was to investigate and compare the properties of cookies formulated using raw (RCF), cooked (CCF), and germinated (GCF) chickpea flours. The techno-functional properties of these flours were determined, and scanning electron microscope images and mid-infrared spectra were obtained. The rheological properties of cookie doughs were measured along with their mid-infrared spectra. Baked cookies were analyzed for their technological properties as well as their in vitro digestion properties. Sensory analysis was also performed for all the cookies. The most significant difference among the flours was observed in their water retention capacity, and CCF had 119.7% higher water retention capacity compared to RCF. The dough made with CCF had quite different rheological properties from the others. The cookies baked with GCF had the highest baking loss and spread ratio. The CCF-containing cookies had the hardest structure. The cookies made from RCF had a higher resistant starch content followed by the cookies with GCF. All the cookies had similar scores in all aspects tested in the sensory analysis. The use of three different forms of chickpea flour in cookie formulations resulted in products with very different properties; however, their overall acceptability levels were close.Article Citation - WoS: 9Citation - Scopus: 11Authentication of Pomegranate Juice in Binary and Ternary Mixtures With Spectroscopic Methods(Elsevier, 2023) Aykaç, Başak; Çavdaroğlu, Çağrı; Özen, BanuFruit juices are among the most commonly adulterated food products and especially pomegranate juice as a high value product is mixed with different adulterants for unfair economic profit. It was aimed to investigate the performances of UV–visible and Fourier-transform infrared (FTIR) spectroscopies combined with chemometric methods to determine adulteration of pomegranate juice with dark colored sour cherry and black carrot juices. Binary and ternary mixtures of pomegranate juice with 2 adulterants were prepared at 5–25% levels. After various data transformations, both spectroscopic data of authentic and adulterated samples were evaluated with different chemometric classification tools. Classification models with 97% correct classification rate for validation set were obtained both for UV–visible and FTIR spectral data. Accurate predictions of adulterant concentration were also achieved with chemometric models using both spectroscopic data. These spectroscopic techniques provide rapid and accurate prediction of pomegranate juice adulteration in binary and ternary mixtures with dark colored juices.Article Citation - WoS: 28Citation - Scopus: 29Detection of Vinegar Adulteration With Spirit Vinegar and Acetic Acid Using Uv–visible and Fourier Transform Infrared Spectroscopy(Elsevier, 2022) Çavdaroğlu, Çağrı; Özen, BanuVinegar is one of the commonly adulterated food products, and variations in product and adulterant spectrum make the detection of adulteration a challenging task. This study aims to determine adulteration of grape vinegars with spirit vinegar and synthetic acetic acid using different spectroscopic methods. For this purpose, grape vinegars were mixed separately with spirit vinegar and diluted synthetic acetic acid (4%) at 1–50% (v/v) ratios. Spectra of vinegars and mixtures were obtained with UV–visible and Fourier-transform infrared (FTIR) spectrometers. Data were evaluated with various chemometric methods and artificial neural networks (ANN). Correct classification rates of at least 94.3% and higher values were obtained by the evaluation of both spectroscopic data along with their combination with chemometric methods and ANN for discrimination of non-adulterated and adulterated vinegars. UV–vis and FTIR spectroscopy can be rapid and accurate ways of detecting adulteration in vinegars regardless of adulterant type.Review Citation - WoS: 10Citation - Scopus: 10Authentication of Vinegars With Targeted and Non-Targeted Methods(Taylor & Francis, 2023) Çavdaroğlu, Çağrı; Çavdaroğlu, Çağrı; Özen, Banu; Özen, Fatma BanuThere has been a growing interest in vinegar, especially after the increasing reports about its beneficial health effects. Bioactive compounds of vinegar are associated with its antimicrobial, antioxidant, antidiabetic, antitumor, and anti-obesity types of activities. Quality of vinegar is related with the authenticity of the product besides the amounts of bioactive compounds in its composition. Addition of cheaper substitutes to higher quality vinegars and false labeling are some common authentication problems for this product. There are various examples of the use of targeted and untargeted methods in authentication studies for vinegars. Specific constituents and properties of vinegars such as molecular isotope ratios and individual volatile compounds were used to detect adulteration with targeted methods. On the other hand, untargeted methods, mostly in the form of the application of spectroscopic techniques, such as infrared and fluorescence spectroscopy in combination with chemometrics, provide an overall measurement. This review mainly focuses on adulteration types and elaborates on different targeted and non-targeted methods used to authenticate vinegars.Article Citation - WoS: 25Citation - Scopus: 30Prediction of Chemical Parameters and Authentication of Various Cold Pressed Oils With Fluorescence and Mid-Infrared Spectroscopic Methods(Elsevier Ltd., 2021) Doğruer, Ilgın; Uyar, H. Hilal; Uncu, Oğuz; Özen, BanuIt was aimed to compare the performances of two spectroscopic methods, fluorescence and mid-infrared spectroscopy, in terms of their adulteration detection and estimation of several chemical properties for various cold pressed seed oils. Spectroscopic profiles, fatty acid, free fatty acid and total phenol contents of pumpkin seed, grape seed, black cumin oil, and sesame seed oils were determined and these oils were mixed with sunflower oil at 1–50% (v/v). Both spectroscopic techniques provided comparable results for determination of adulteration of each oil type and the most successful prediction was obtained for pumpkin seed oil at levels >%1. Combined data set of oils resulted in successful quantification of their free fatty acid value, total phenol and major fatty acids contents with both spectroscopic methods regardless of oil type. Both techniques could be used as reliable, fast and environmentally friendly alternatives in the analyses of different types of seed oils. © 2020 Elsevier LtdConference Object Bioethanol Production From Low Cost Agro-Industrial Waste Products(Elsevier, 2012) Evcan, Ezgi; Tarı, Canan; Özen, BanuIn recent years, the rapid increase in environmental problems, greenhouse gas emissions, fuel prices and the unlimited consumption of limited fossil fuel stocks made people search for some alternative energy sources. Bioethanol is one of the most popular alternative source with its many beneficial features. Besides, bioethanol which will be obtained from low cost raw materials will be more attractive. Bioethanol produced from lignocellulosic biomass sources, such as agricultural residues, offers unique environmental and economic benefits.Article Citation - WoS: 11Citation - Scopus: 10Ir Spectroscopy and Chemometrics for Physical Property Prediction of Structured Lipids Produced by Interesterification of Beef Tallow(Academic Press, 2019) Aktaş, Ayşe Burcu; Alamprese, Cristina; Fessas, Dimitrios; Özen, BanuThe aim of this study was the application of infrared spectroscopy and chemometrics to predict slip melting point (SMP), melting points at different melted fat percentages (MP85, MP90, MP95), and consistency of structured lipids to provide fast and reliable methods for their characterization. Tallow was chemically or enzymatically interesterified with corn, canola, or safflower oils, at different ratios. Fourier-transform mid-infrared (FT-IR) and near-infrared (FT-NIR) spectra of melted and solid samples were collected. Partial-least-square regression models constructed after different spectra pre-treatments and variable selection were satisfactory. The best models were obtained with solid sample FT-NIR spectra: in cross-validation, determination coefficients and root mean square errors were, respectively, 0.85 and 1.7 degrees C for SMP, 0.85 and 2.8 degrees C for MP90, and 0.91 and 14 MPa for consistency. Infrared spectroscopy can be considered a promising tool to determine physical properties of interesterified fats.Article Citation - WoS: 61Citation - Scopus: 70Use of Ftir and Uv-Visible Spectroscopy in Determination of Chemical Characteristics of Olive Oils(Elsevier, 2019) Uncu, Oğuz; Özen, Banu; Tokatlı, FigenIt was aimed to predict fatty acid ethyl ester (FAEE), wax, diacylglycerol (DAG) and color pigment contents of olive oils by using rapid and non-destructive spectroscopic techniques (FTIR and UV-vis) individually and in combination. Prediction models were constructed by using partial least squares (PLS) regression with cross and external validation. FAEEs were estimated best with FTIR + UV-Vis spectroscopy (R-cv.(2) = 0.84, R-pred(2) = 0.90, and RPD = 3.0). PLS model with R-cv.(2) = 0.79, R-pred(2) = 0.71, and RPD = 1.9 was obtained for the estimation of 1,2 DAG using FTIR spectral data. Major pigments, lutein, pheophytin a and their derivatives and total xanthophylls were quantified successfully by FTIR + UV-Vis with a range of R-cv.(2) of 0.71-0.85, R-pred(2) of 0.70-0.84, and RPD = 1.5-2.5 values but the prediction of the rest of the pigments were poor (R-cv(2) = 0.60-0.76, R-pred(2) = 0.42-0.62, and RPD = 1.2-1.5). Combination of two spectral data resulted in average prediction of wax content of oils (R-cal(2) = 0.95, R-pred(2) = 0.75, and RPD = 1.9). FTIR and UV-vis spectroscopic techniques in combination with PLS regression provided promising results for the prediction of several chemical parameters of olive oils; therefore, they could be alternatives to traditional analysis methods.Article Citation - WoS: 34Citation - Scopus: 42Importance of Some Minor Compounds in Olive Oil Authenticity and Quality(Elsevier Ltd., 2020) Uncu, Oğuz; Özen, BanuBackground: Consumption and production of olive oils have been increasing steadily worldwide mainly due to proven health benefits and sensorial characteristics of olive oil. M the same time, rising demand makes it harder to protect olive oil genuineness; therefore, inauthentic products have been always a serious problem in olive oil industry. Scope and approach: Some minor compounds such as pigments (chlorophylls and carotenoids) including their derivatives pyropheophytins (PPPs), diacylglycerols (DAGs) and fatty acid ethyl esters (FAEEs) are all prominent compounds with their discriminatory and descriptive properties. Among several different approaches, use of these components to differentiate genuine and adulterated olive oils could be a promising choice since it is harder to mimic these compounds in fake mixtures. Recent studies focus on these compounds as authentication and quality tools for olive oil and potential of these compounds are aimed to be reviewed. Key findings and conclusions: Results from literature indicated that these parameters could be used in both authenticity and quality determination of olive oils with some limitations. Pigments were found to be more promising in geographical and/or varietal classification. All of the discussed components have successful applications in determination of olive oil quality with respect to storage history and oil grades. However, in detection of certain types of adulteration techniques such as soft deodorization, reviewed parameters did not work effectively alone. Regulations could be updated with these findings and use of combined parameters including discussed compounds could be further investigated for unsolved authentication problems.