Photonics / Fotonik
Permanent URI for this collectionhttps://hdl.handle.net/11147/2590
Browse
6 results
Search Results
Article Citation - WoS: 3Citation - Scopus: 3Stable Single Layer Structures of Aluminum Oxide: Vibrational and Electronic Characterization of Magnetic Phases(Elsevier, 2022) Özyurt, A. Kutay; Molavali, Deniz; Şahin, HasanThe structural, magnetic, vibrational and electronic properties of single layer aluminum oxide (AlO2) are investigated by performing state-of-the-art first-principles calculations. Total energy optimization and phonon calculations reveal that aluminum oxide forms a distorted octahedral structure (1T′-AlO2) in its single layer limit. It is also shown that surfaces of 1T′-AlO2 display magnetic behavior originating from the O atoms. While the ferromagnetic (FM) state is the most favorable magnetic order for 1T′-AlO2, transformation to a dynamically stable antiferromagnetic (AFM) state upon a slight distortion in the crystal structure is also possible. It is also shown that Raman activities (350–400 cm−1) obtained from the vibrational spectrum can be utilized to distinguish the possible magnetic phases of the crystal structure. Electronically, both FM and the AFM phases are semiconductors with an indirect band gap and they can form a type-III vdW heterojunction with graphene-like ultra-thin materials. Moreover, it is predicted that presence of oxygen defects that inevitably occur during synthesis and production do not alter the magnetic state, even at high vacancy density. Apparently, ultra-thin 1T′-AlO2 with its stable crystal structure, semiconducting nature and robust magnetic state is a quite promising material for nanoscale device applications.Article Citation - WoS: 4Citation - Scopus: 4Identification of a Magnetic Phase Via a Raman Spectrum in Single-Layer Mnse: an Ab Initio Study(Elsevier, 2022) Yayak, Yankı Öncü; Şahin, Hasan; Yağmurcukardeş, MehmetMotivated by the recent experimental realization of single-layer two-dimensional MnSe [ACS Nano2021, 15, 13794-13802], structural, magnetic, elastic, vibrational, and electronic properties of single-layer MnSe are investigated by using density functional theory-based calculations. Among four different magnetic phases, namely, ferromagnetic (FM) and Nẽel-, zigzag-, and stripy-antiferromagnetic (AFM) phases, the Nẽel-AFM structure is found to be the energetically most favorable phase. Structural optimizations show the formation of in-plane anisotropy within the structures of zigzag- and stripy-AFM phases in single-layer MnSe. For the dynamically stable four magnetic phases, predicted Raman spectra reveal that each phase exhibits distinctive vibrational features and can be distinguished from each other. In addition, the elastic constants indicate the mechanical stability of each magnetic phase in single-layer MnSe and reveal the soft nature of each phase. Moreover, electronic band dispersion calculations show the indirect band gap semiconducting nature with varying electronic band gap energies for all magnetic phases. Furthermore, the atomic orbital-based density of states reveals the existence of out-of-plane orbitals dominating the top valence states in zigzag- and stripy-AFM phases, giving rise to the localized states. The stability of different magnetic phases and their distinct vibrational and electronic properties make single-layer MnSe a promising candidate for nanoelectronic and spintronic applications.Article Citation - WoS: 8Citation - Scopus: 9Tuning the Colour of Solution Processed Perylene Tetraester Based Oleds From Yellowish-Green To Greenish-White: a Molecular Engineering Approach(Elsevier, 2023) Aksoy, Erkan; Bozkuş, Volkan; Varlıklı, CananThree regioisomericaly pure 1,7-di-ethynyl bridged perylene-3,4,9,10-tetracarboxy tetrabutylesters functionalized with triisopropylsilyl-ethynylen (PTE1), phenyl-ethynylen (PTE2) and tetraphenylsilyl-ethynylen (PTE3) groups were synthesized. Photophysical, thermal, electrochemical, and solution processed electroluminescence (EL) behaviours were investigated in comparison with a basic perylene-3,4,9,10-tetracarboxy tetrabutylester (PTEref) structure. Stepwise π conjugation, allowed tuning the absorption and photoluminescence wavelengths of the PTEs without disturbing the photo, thermal and electrochemical stabilities; ≫10h, >250 °C, and >50 cycles, respectively. Electron mobility of PTE2 is measured to be more than 10-fold of the other PTE derivatives. Individual utilization of PTE derivatives as solid-state emitters in poly(N-vinylcarbazole) (PVK): 2-(4-Biphenylyl)-5-phenyl-1,3,4-oxadiazole (PBD) host matrix produced yellowish-green EL. Benefiting from higher electron mobiliy, PTE2 emitter presented the best device efficiency values with an EL maximum of 535 nm. Whereas dual doping of the synthesized PTEs with PTEref resulted in greenish-white light with increased stability. Although the emitting layer contained no red emitting component, optimization of the dual doping ratio of PTEref:PTE3 produced a colour rendering index value of 76 with Commission Internationale d'Eclairage coordinates of (0.29, 0.37).Article Citation - WoS: 13Citation - Scopus: 14Synthesis of Albumin Nanoparticles in a Water-Miscible Ionic Liquid System, and Their Applications for Chlorambucil Delivery To Cancer Cells(Elsevier, 2022) Akdoğan, Yaşar; Sözer, Sümeyra Çiğdem; Akyol, Cansu; Başol, Merve; Karakoyun, Çiğdem; Çakan Akdoğan, GülçinSerum albumin has been a preferred protein to generate biodegradable and non-toxic nanoparticles (NPs) for drug delivery applications. Different methods applied for the preparation of serum albumin NPs mostly used organic solvents. Here, we prepared serum albumin NPs in an ionic liquid (IL) system. ILs are considered to be green and designer solvents with unique properties that can replace organic solvents in the synthesis of albumin NPs. Bovine serum albumin (BSA) proteins dissolved in water were transformed into BSA NPs in a water/ Triton™X (TX-100), 1-butanol/1-butyl-3-methylimidazolium trifluoromethanesulfonate (BmimCF3SO3) microemulsion-like system by using a high-speed homogenizer and crosslinker glutaraldehyde. The obtained BSA NPs have been used in drug loading and release studies with a hydrophobic anticancer drug chlorambucil (Chl). Drug loading increased as increasing the ratio of Chl incubated with BSA NPs. Monitoring the drug release by UV–Vis spectroscopy revealed a burst release at first 4 h, but two-thirds of drugs stayed with NPs upon diffusion method. On the other hand, cellular uptake of Chl loaded BSA NPs caused a significant MCF7 breast cancer cell death, whereas free Chl and unloaded BSA NPs did not have a significant effect on the cell viability. Furthermore, in vivo toxicity assessment of BSA NPs obtained in the IL system was conducted in the zebrafish animal model. It showed that zebrafish body is able to eliminate BSA NPs without any toxic side effects and encapsulation of Chl into NPs reduced the toxicity of free Chl. In summary, we showed that BSA NPs with size smaller than 200 nm could be prepared in BmimCF3SO3 mediated system. They can be used for Chl loading (up to 6.9 wt%) with a sustainable release and they induce significant cell death in Chl sensitive cancer cells up to 45% in 24 h. These results indicate that BSA NPs could be prepared alternatively in IL systems and used in drug delivery studies.Article Citation - WoS: 2Citation - Scopus: 5Experimental Modeling of Antimony Sulfides-Rich Geothermal Deposits and Their Solubility in the Presence of Polymeric Antiscalants(Elsevier, 2022) Karaburun, Emre; Sözen, Yiğit; Çiftçi, Celal; Şahin, Hasan; Baba, Alper; Akbey, Ümit; Yeşilnacar, Mehmet İrfan; Erdim, Eray; Regenspurg, Simona; Demir, Mustafa MuammerAntimony (Sb)-rich geothermal deposits have been observed in many geothermal power plants worldwide. They occur as red-colored, sulfidic precipitates disturbing energy-harvesting by clogging the geothermal installations. In order to prevent the formation of this scale, information on its physicochemical features is needed. For this purpose, Sb-rich sulfide-based deposits were synthesized at controlled conditions in a pressurized glass reactor at geothermal conditions (135 °C and 3.5 bar). Various polymeric antiscalants with different functional groups, such as acrylic acid, sulphonic acid, and phosphonic acid groups were tested for their effect on Sb sulfide solubility. An additional computational study was performed to determine the binding energy of Sb and S atoms to these groups. The results suggest that sulfonic acid groups are the most affective. Therefore, it was concluded that these macromolecule containing sulfonic acid groups and poly (vinyl sulfonic acid) derivatives could potentially act as antiscalants for the formation of antimony sulfide.Article Citation - WoS: 4Citation - Scopus: 4Light-Induced Modification of the Schottky Barrier Height in Graphene/Si Based Near-Infrared Photodiodes(Elsevier, 2022) Fidan, Mehmet; Dönmez, Gülçin; Yanılmaz, Alper; Ünverdi, Özhan; Çelebi, CemThe impact of light on the Schottky barrier height (SBH) in p-type graphene/n-type Si (p-Gr/n-Si) based near-infrared photodiodes is investigated. Hall effect and optoelectronic transport measurements carried out under illumination of 905 nm wavelength light showed that zero-bias SBH in such photodiodes can be effectively tuned in a range between 0.7 and 0.9 eV consistent with the variation in their open-circuit voltage. Shockley-Read-Hall model, which considers the charge recombination through mid-gap and interface states at the p-Gr/n-Si heterojunction, is used to explain the experimentally observed nonlinear dependence of SBH on the incident light. Light induced tunability of SBH at the graphene/semiconductor heterojunction is of great importance especially for the development of new generation optically driven devices in which graphene acts as a functioning element.