This item is non-discoverable
Hızlı, Burak
Loading...
Profile URL
Name Variants
Job Title
Email Address
Main Affiliation
01. Izmir Institute of Technology
Status
Current Staff
Website
ORCID ID
Scopus Author ID
Turkish CoHE Profile ID
Google Scholar ID
WoS Researcher ID
Sustainable Development Goals
1NO POVERTY
0
Research Products
2ZERO HUNGER
0
Research Products
3GOOD HEALTH AND WELL-BEING
0
Research Products
4QUALITY EDUCATION
0
Research Products
5GENDER EQUALITY
0
Research Products
6CLEAN WATER AND SANITATION
0
Research Products
7AFFORDABLE AND CLEAN ENERGY
1
Research Products
8DECENT WORK AND ECONOMIC GROWTH
1
Research Products
9INDUSTRY, INNOVATION AND INFRASTRUCTURE
1
Research Products
10REDUCED INEQUALITIES
0
Research Products
11SUSTAINABLE CITIES AND COMMUNITIES
0
Research Products
12RESPONSIBLE CONSUMPTION AND PRODUCTION
1
Research Products
13CLIMATE ACTION
1
Research Products
14LIFE BELOW WATER
0
Research Products
15LIFE ON LAND
0
Research Products
16PEACE, JUSTICE AND STRONG INSTITUTIONS
0
Research Products
17PARTNERSHIPS FOR THE GOALS
0
Research Products
This researcher does not have a Scopus ID.
This researcher does not have a WoS ID.
No records found in other affiliations.
Scholarly Output
3
Articles
2
Views / Downloads
2264/1758
Supervised MSc Theses
1
Supervised PhD Theses
0
WoS Citation Count
18
Scopus Citation Count
19
Patents
0
Projects
0
WoS Citations per Publication
6.00
Scopus Citations per Publication
6.33
Open Access Source
1
Supervised Theses
1
| Journal | Count |
|---|---|
| Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing | 1 |
| Strain | 1 |
Current Page: 1 / 1
Scopus Quartile Distribution
Competency Cloud
3 results
Scholarly Output Search Results
Now showing 1 - 3 of 3
Article Citation - WoS: 5Citation - Scopus: 5Investigation and Validation of the Flow Stress Equation and Damage Model Parameters of an Electron Beam Melted Ti6al4v Alloy With a Martensitic Phase(Elsevier, 2023) Hızlı, Burak; Güden, Mustafa; Taşdemirci, Alper; Yıldıztekin, Murat; Erten, Hacer İrem; Çimen, Gülden; Hızlı, Burak; 01. Izmir Institute of Technology; 03.10. Department of Mechanical Engineering; 03. Faculty of EngineeringThe Johnson and Cook flow stress and damage model parameters of an electron beam melt (EBM)-Ti64 alloy composed of & alpha;' (martensite) and & alpha;+& beta; and an extruded-annealed conventional Ti64 alloy were determined experimentally. The validities of the determined flow stress equations and damage model parameters were then verified by the numerical simulations of the compression tests on the Body Centered Cubic lattices produced using the same EBM parameters with the solid EBM samples. In addition, a compression flow stress equation was extracted from the small-size test specimens (1 and 2 mm diameter) taken directly from the struts of the as-built lattices. The microscopic observations, XRD analyses and hardness tests confirmed the presence of & alpha;& PRIME; phase in the EBM solid samples and in the struts of the BCC lattices, which reduced the ductility of the EBM solid specimens and struts compared to the conventional Ti64. Furthermore, the partially melt particles on the surfaces of the struts acted as the stress concentration sides for micro-cracking; hence, the compression flow stresses of the struts were found to be significantly lower than those of the as-built EBM solid specimens. The flow stress equation derived from the struts predicted more accurately the compression behavior of the lattices. The compression tests and models showed that early damage formation in the lattices was noted to decrease the initial peak and post peak stresses. As with the experiments, the initial damage occurred in the models with the separation of the nodes at the lattice cell surface edges. This resulted in an abrupt reduction in the stresses after the peak stress. The numerical lattices without damage showed a localized lattice deformation at the mid-sections and the stress increased continuously as a function of normal strain.Master Thesis The Constitutive and Damage Models of Additively Manufactured Ti6al4v Alloy(01. Izmir Institute of Technology, 2021) Güden, Mustafa; Hızlı, Burak; Güden, Mustafa; 01. Izmir Institute of Technology; 03.10. Department of Mechanical Engineering; 03. Faculty of EngineeringElectron Beam Melting (EBM) is one of the metal additive manufacturing methods that enable the fabrication of Ti6Al4V alloy parts with intended shapes in where this alloy is of significant interest such as aerospace and biomedical industries due to its outstanding properties. In this study, the microstructural and mechanical properties of EBM-produced Ti64 were comprehensively investigated. Microstructural analysis was conducted on as-built specimens. Microstructural analysis showed that EBM-produced Ti64 possesses α+β duplex phase with directional microstructural alterations and high porosity fraction in the part volume. Mechanical properties were investigated under tension loadings at quasi-static rates (0.001-0.1 1/s) and compression loading at quasi-static and high strain rates (0.001-2154 1/s). Thereafter, Johnson-Cook (JC) strength and damage models were individually calibrated from the experimental results of tension and compression behaviors and experimental fracture strains in order to numerically predict the material flow behavior of EBM-produced Ti64 considering the strain, strain rate, and temperature effects in the case of various loadings combined with temperature changes. EBM-produced Ti64 exhibited proximate mechanical properties in terms of tension and compression behaviors, however extremely low ductile behavior under tension loadings resulting premature failure without necking. Eventual fracture of this material occurred via tearing of the scanned layers for tension loadings and shear crack following the shear band formation propagation on 45° to loading axis for compression loadings. Calibrated JC strength and damage models for EBM-produced Ti64 were able to predict flow behavior and fracture strains within strain rate range between 0.001 and 1000 1/s. However, the JC strength model could not predict the flow behavior at excessively high strain rates (2154 1/s) due to complex deformation mechanisms including adiabatic heating.Article Citation - WoS: 13Citation - Scopus: 14The Quasi-Static Crush Response of Electron-Beam Ti6al4v Body-Centred Lattices: The Effect of the Number of Cells, Strut Diameter and Face Sheet(Wiley, 2022) Güden, Mustafa; Alpkaya, Alican Tuncay; Taşdemirci, Alper; Hızlı, Burak; Taşdemirci, Alper; Alpkaya, Alican Tuncay; Hızlı, Burak; Güden, Mustafa; 01. Izmir Institute of Technology; 03.10. Department of Mechanical Engineering; 03. Faculty of EngineeringThe effect of the number of cells, strut diameter and face sheet on the compression of electron-beam-melt (EBM) Ti6Al4V (Ti64) body-centred-cubic (BCC) lattices was investigated experimentally and numerically. The lattices with the same relative density (~0.182) were fabricated with and without 2-mm-thick face sheets in 10 and 5 mm cell size, 8–125 unit cell (two to five cells/edge) and 2 and 1 mm strut diameter. The experimental compression tests were further numerically simulated in the LS-DYNA. Experimentally two bending-dominated crushing modes, namely, lateral and diagonal layer crushing, were determined. The numerical models however exhibited merely a bending-dominated lateral layer crushing mode when the erosion strain was 0.4 and without face-sheet models showed a diagonal layer crushing mode when the erosion strain was 0.3. Lower erosion strains promoted a diagonal layer crushing mode by introducing geometrical inhomogeneity to the lattice, leading to strain localisation as similar to the face sheets which introduced extensive strut bending in the layers adjacent to the face sheets. The face-sheet model showed a higher but decreasing collapse strength at an increasing number of cells, just as opposite to the without face-sheet model, and the collapse strength of both models converged when the number of cells was higher than five-cell/edge. The decrease/increase of the collapse strengths of lattices before the critical number of cells was claimed mainly due to the size-imposed lattice boundary condition, rather than the specimen volume. The difference in the experimental collapse strengths between the 5- and the 10-mm cell-size lattices was ascribed to the variations in the microstructures—hence the material model parameters between the small-diameter and the large-diameter EBM-Ti64 strut lattices.