Environmental Engineering / Çevre Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4321
Browse
6 results
Search Results
Article Citation - WoS: 31Citation - Scopus: 34Insights Into Engineered Graphitic Carbon Nitride Quantum Dots for Hazardous Contaminants Degradation in Wastewater(Elsevier, 2023) Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Vatanpour, Vahid; Yoon, Yeojoon; Khataee, AlirezaIncreased environmental pollution is a critical issue that must be addressed. Photocatalytic, adsorption, and membrane filtration methods are suitable in environmental governance because of their high selectivity, low cost, environment-friendly nature, and excellent treatment efficiency. Graphitic carbon nitride (g-C3N4) quantum dots (QDs) have been considered as photocatalysts, adsorbents, and membrane materials for wastewater treatments, owing to their stability, adsorption capacity, photochemical properties, and low toxicity and cost. This review summarizes g-C3N4 QD synthesis techniques, operating parameters affecting the removal performance in the treatment process, modification effects with other semiconductors, and benefits and drawbacks of g-C3N4 QD-based materials. Furthermore, this review discusses the practical applications of g-C3N4 QDs as adsorbents, photocatalysts, and membrane materials for organic and inorganic contaminant treatments and their value-added product formation potential. Modified g-C3N4 QD-based material adsorbents, photocatalysts, and membranes present potentially applicable effects, such as removal of most waterborne contaminants. Excellent results were obtained for the reduction of methyl orange, bisphenol A, tetracycline, ciprofloxacin, phenol, rhodamine B, E. coli, and Hg. Overall, this paper provides comprehensive background on g-C3N4 QD-based materials and their diverse applications in wastewater treatment, and it presents a foundation for the enhancement of similar unique materials in the future.Book Part Citation - Scopus: 32Language of Response Surface Methodology as an Experimental Strategy for Electrochemical Wastewater Treatment Process Optimization(Elsevier, 2022) Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Khataee, AlirezaThe availability and accessibility to safe and secure water resources are the key technological and scientific concerns of global significance. As a result of water scarcity worldwide, wastewater treatment and reuse are considered viable options to replace freshwater resources in agricultural irrigation and domestic and industrial purposes. A significant need for clean water has promoted the invention and/or enhancement of several electrochemical wastewater treatment (EWT) processes. Optimization of the process variables plays a crucial role in wastewater treatment to enhance technology performance, considering removal efficiency, operating cost, and environmental impacts. These processes are fundamentally complex multivariable, and the optimization through conventional methods is unreliable, inflexible, and time- and material-consuming. In this perspective, response surface methodology (RSM) appears to be a beneficial statistical experimental strategy for the performance optimization of the EWT process. This model could be utilized for the optimization and analysis of the individual and/or combined effects of operational variables on the treatment process to improve the system performance. Furthermore, this model provides a number of information from a slight number of experimental trials. In this chapter, a summary and a discussion are presented on the RSM model used in the electrochemical wastewater treatment processes to overcome process crucial challenges toward the optimization and modeling of process parameters. It provides a potential model to enhance the various types of wastewater treatment process performance with effective optimization. Overall, it is described that the RSM model can be used in EWT processes to find the optimum conditions.Article Citation - WoS: 7Citation - Scopus: 93d Electrode Use in Mdc for Enhanced Removal of Boron From Geothermal Water(Elsevier, 2022) Gören, Ayşegül Yağmur; Ökten, Hatice EserMicrobial desalination cell (MDC) is a significantly promising technology due to its simultaneous features of electricity production, wastewater treatment and desalination. In this paper, the three-dimensional (3D) sponge with activated carbon-chitosan (AC-CS) was synthesized to enhance the efficiency of the MDC system. Effects of operating parameters (boron concentration, electrode surface area, catholyte solution, and activated sludge volume) on MDC performance were also investigated. The MDC with 3D AC-CS anode provided a higher power density of 970 mW/m2, boron removal efficiency of 75.9%, and COD removal efficiency of >90% under optimized conditions. The maximum boron and COD removal efficiencies were 65.6 and 81.4% with the power density of 866.9 mW/m2 for geothermal brine. Moreover, BET analysis showed that the 3D AC-CS anode presented high surface area (230 m2/g) and pore volume (0.202 cm3/g). As an overall result, not only the production of 3D sponge anode electrodes with AC-CS composite was achieved but also desalination and power generation results that were comparable with the literature were presented.Article Citation - WoS: 32Citation - Scopus: 36A Review of Boron Removal From Aqueous Solution Using Carbon-Based Materials: an Assessment of Health Risks(Elsevier, 2022) Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Karagündüz, Ahmet; Khataee, Alireza; Yoon, YeojoonCarbon-based compounds have gained attention of researchers for use in boron removal due to their properties, which make them a viable and low cost adsorbent with a high availability, as well as environmental friendliness and high removal efficiency. The removal of boron utilizing carbon-based materials, including activated carbon (AC), graphene oxide (GO), and carbon nanotubes (CNTs), is extensively reviewed in this paper. The effects of the operating conditions, kinetics, isotherm models, and removal methods are also elaborated. The impact of the modification of the lifetime of carbon-based materials has also been explored. Compared to unmodified carbon based materials, modified materials have a significantly higher boron adsorption capability. It has been observed that adding various elements to carbon-based materials improves their surface area, functional groups, and pore volume. Tartaric acid, one of these doped elements, has been employed to successfully improve the boron removal and adsorption capabilities of materials. An assessment of the health risk posed to humans by boron in treated water utilizing carbon-based materials was performed to better understand the performance of materials in real-world applications. Furthermore, the boron removal effectiveness of carbon-based materials was evalu ated, as well as any shortcomings, future perspectives, and gaps in the literature.Article Citation - WoS: 9Citation - Scopus: 9How Does Arsenic Speciation (arsenite and Arsenate) in Groundwater Affect the Performance of an Aerated Electrocoagulation Reactor and Human Health Risk?(Elsevier, 2022) Gören, Ayşegül Yağmur; Kobya, Mehmet; Khataee, AlirezaArsenic (As) occurrence in water resources has become one of the most critical environmental problems worldwide. The detrimental health impacts on humans have been reported due to the consumption of As-contaminated groundwater resources. Consumption of As-containing water over the long term can cause arsenicosis and chronic effects on human health due to its toxicity. Several treatment processes are available for As removals such as coagulation, ion exchange, adsorption, and membrane technologies but they have various major drawbacks. In the present work, therefore, an aerated electrocoagulation (EC) system with aluminum anodes was operated for simultaneous arsenate (As(V)) and arsenite (As(III)) removal to overcome the disadvantages of other processes such as, sludge formation, difficulties in operation, high operating costs, high energy consumption, and the requirement of pre-treatment process and to enhance the conventional EC process. The combined effects of the applied current (0.075–0.3 A), aeration rate (0–6 L/min), pH (6.5–8.5), and As speciation (As(V)-As(III)) were studied on As removal efficiency. The findings revealed that As removal mostly depended on the airflow rate and the applied current in the EC system. The highest As removal efficiency (99.1%) was obtained at an airflow rate of 6 L/min, a pH of 6.5, an initial As (V) concentration of 200 μg/L, and a current of 0.3 A, with an energy consumption of 2.85 kWh/m3 and an operating cost of 0.66 $/m3. The human health risk assessment of treated water was also examined to understand the performance of the EC system. At most of the experimental runs, the chronic toxic risk (CTR) and carcinogenic risk (CR) of As were within the permissible limits except for an airflow rate of 0–2 L/min, an initial pH of 8.5, and a current of 0.075–0.15 A for high initial As (III) concentrations. Overall, the As removal performance and groundwater risk assessment show that the EC process is a promising option for industrial applications.Article Citation - WoS: 15Citation - Scopus: 18Simultaneous Energy Production, Boron and Cod Removal Using a Novel Microbial Desalination Cell(Elsevier, 2021) Gören, Ayşegül Yağmur; Ökten, Hatice EserThis paper investigates simultaneous boron removal from aqueous solutions, organic matter removal from industrial wastewater and energy production using a Microbial Desalination Cell (MDC). Anode chamber of the conventional MDC cell was modified to include 3D cubic electrodes as a novel design. Effects of operating parameters, including electrode type (3D-electrode and 2D-electrode), anolyte solution temperature (20 °C, 40 °C, and 60 °C), and activated sludge:wastewater volumetric ratio (S:WW = 1:1, 1:2, and 1:5), on MDC performance were studied. Furthermore, real geothermal water treatment was investigated under optimum operating conditions. Boron and organic matter removal efficiencies and the produced power density results were promising for 3D-electrodes under optimum operating conditions. The maximum boron removal efficiency, COD removal efficiency, and power density were 55.5%, 91.5%, and 9.04 mW/m3 treating real geothermal water at optimum operating conditions. The analyses of Scanning Electron Microscope with Energy Dispersive X-ray spectrometer (SEM-EDX) demonstrated biofilm formation and salt deposition on membrane surfaces, which most probably reduced the performance of MDC. Consequently, our results showed that use of 3D-electrodes was a promising improvement to the conventional configurations with 2-D electrodes since removal efficiencies and energy production were comparable for a more compact electrode structure.