Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
8 results
Search Results
Article Hydrogeochemical Assessment and Health Risks of Groundwater in Sahand Volcanic Foreland (NW Iran): Arsenic Speciation and Heavy Metal Risk Indicators(Academic Press Inc Elsevier Science, 2026) Ghayurdoost, Farhad; Zarghami, Mahdi; Sadeghfam, Sina; Jabraili-Andaryan, Nasser; Nikmaram, Sara; Baba, Alper; Mosaferi, MohammadDue to the toxic nature of arsenic (As) and its elevated concentrations in many water resources, numerous studies have focused on understanding its origin, distribution, and impacts. This study aimed to identify the dominant As species in groundwater of the Sahand Volcanic Foothills, assess water quality indices, and examine heavy metal (HM) concentrations to address rising concerns about groundwater contamination. A total of 21 groundwater samples were collected and analyzed in accordance with world health organization (WHO) guidelines. Although most samples fell within acceptable ranges, several (notably S10, S20, and S21) exhibited elevated levels of total dissolved solids (TDS), electrical conductivity (EC), and HMs, particularly iron (Fe) and As. Hydrochemical assessments using Piper, Gibbs, Stiff, and Schoeller diagrams indicated that geochemical processes resulting from rock dissolution were the main factors controlling groundwater chemistry, with limited influence from anthropogenic pollution. According to the groundwater quality index (GWQI), most samples were categorized as "good" to "excellent," though some areas ranged from "moderate" to "very poor." HM pollution indices revealed that As concentrations exceeded permissible limits. Health risk assessments further showed that both oral and dermal exposure posed significant carcinogenic and non-carcinogenic risks, especially for children. Speciation analysis indicated that arsenate (As V) was the dominant form of As, consistent with oxidizing aquifer conditions, and is less biologically hazardous than arsenite (As III). The study highlights the necessity of continuous groundwater monitoring, effective pollution source management, and implementation of protective regulations to mitigate environmental and health risks in the region.Article Citation - WoS: 1Citation - Scopus: 2Recycling of Gas-To Sludge as a Potential Organic Amendment: Effect on Soil and Cotton Properties Under Hyperarid Conditions(Academic Press, 2023) Mabrouk, O.; Hamdi, H.; Sayadi, S.; Al-Ghouti, M.A.; Abu-Dieyeh, M.; Kogbara, R.; Al-Sharshani, A.Gas-to-liquid (GTL) sludge is a specific wastewater treatment by-product, which is generated during the industrial process of natural gas conversion to transportation fuels. This least studied sludge is pathogen-free and rich in organic carbon and plant nutrients. Therefore, it can be reused for soil enhancement as a sustainable management strategy to mitigate landfill gas emissions. In this field study, we compared the performance of soil treatments with GTL sludge to the more conventional chemical fertilizers and cow manure compost for the cultivation of cotton under hyperarid conditions. After a complete growing season, GTL sludge application resulted in the enhancement of soil properties and plant growth compared to conventional inputs. As such, there was a significant dose-dependent increase of soil organic matter (4.01% and 4.54%), phosphorus (534 and 1090 mg kg−1), and cumulative lint yield (4.68 and 5.67 t ha−1) for GTL sludge application rates of 1.5% and 3%, respectively. The produced fiber quality was adequate for an upland cotton variety (Gossypium hirsutum var. MAY 344) and appeared more dependent on the prevailing climate conditions than soil treatments. On the other hand, the adverse effects generally related to industrial sludge reuse were not significant and did not affect the designed agro-environmental system. Accordingly, plants grown on GTL sludge-amended soils showed lower antioxidant activity despite significant salinity increase. In addition, the concentrations of detected heavy metals in soil were within the standards’ limits, which did not pose environmental issues under the described experimental conditions. Leachate analysis revealed no risks for groundwater contamination with phytotoxic metals, which were mostly retained by the soil matrix. Therefore, recycling GTL sludge as an organic amendment can be a sustainable solution to improve soil quality and lower carbon footprint. To reduce any environmental concerns, an application rate of 1.5% could be provisionally recommended since a two-fold increase in sludge dose did not result in a significant yield improvement. © 2023 Elsevier LtdArticle Citation - WoS: 8Citation - Scopus: 8Removal of Arsenic in Groundwater From Western Anatolia, Turkey Using an Electrocoagulation Reactor With Different Types of Iron Anodes(Elsevier, 2022) Kobya, Mehmet; Dolaz, Mustafa; Özaydın Şenol, Burcu; Gören, Ayşegül YağmurElectrocoagulation (EC) is a significantly efficient method for As removal from waters and received considerable attention recently. In this study, the natural groundwater (GW) samples containing As concentrations of GW-1: 538.8 μg L−1, GW-2: 1132.1 μg L−1, and GW-3: 52, 000 μg L−1 were obtained from different provinces and treated by EC process using different iron anodes (plate, ball, and scrap). To achieve drinking water As standard (10 μg L−1), the operational time, applied current, and As removal optimization for all anode types were studied. At applied current of 0.025 A, the As removal efficiency, EC time, and operating cost were >99.9%, 180 min and 0.406 $ m−3 for ball anodes, >99.9%, 100 min and 0.0813 $ m−3 for plate anodes, >99.9%, 80 min and 0.0815 $ m−3 for scrap anodes for GW-3, respectively. It was observed that as the As concentration in the GW increased, the EC time and operating cost increased. Overall, it was concluded that Fe scrap anodes are more advantageous than other types of anodes in terms of operating cost in EC reactor for As removal.Article Citation - WoS: 9Citation - Scopus: 9How Does Arsenic Speciation (arsenite and Arsenate) in Groundwater Affect the Performance of an Aerated Electrocoagulation Reactor and Human Health Risk?(Elsevier, 2022) Gören, Ayşegül Yağmur; Kobya, Mehmet; Khataee, AlirezaArsenic (As) occurrence in water resources has become one of the most critical environmental problems worldwide. The detrimental health impacts on humans have been reported due to the consumption of As-contaminated groundwater resources. Consumption of As-containing water over the long term can cause arsenicosis and chronic effects on human health due to its toxicity. Several treatment processes are available for As removals such as coagulation, ion exchange, adsorption, and membrane technologies but they have various major drawbacks. In the present work, therefore, an aerated electrocoagulation (EC) system with aluminum anodes was operated for simultaneous arsenate (As(V)) and arsenite (As(III)) removal to overcome the disadvantages of other processes such as, sludge formation, difficulties in operation, high operating costs, high energy consumption, and the requirement of pre-treatment process and to enhance the conventional EC process. The combined effects of the applied current (0.075–0.3 A), aeration rate (0–6 L/min), pH (6.5–8.5), and As speciation (As(V)-As(III)) were studied on As removal efficiency. The findings revealed that As removal mostly depended on the airflow rate and the applied current in the EC system. The highest As removal efficiency (99.1%) was obtained at an airflow rate of 6 L/min, a pH of 6.5, an initial As (V) concentration of 200 μg/L, and a current of 0.3 A, with an energy consumption of 2.85 kWh/m3 and an operating cost of 0.66 $/m3. The human health risk assessment of treated water was also examined to understand the performance of the EC system. At most of the experimental runs, the chronic toxic risk (CTR) and carcinogenic risk (CR) of As were within the permissible limits except for an airflow rate of 0–2 L/min, an initial pH of 8.5, and a current of 0.075–0.15 A for high initial As (III) concentrations. Overall, the As removal performance and groundwater risk assessment show that the EC process is a promising option for industrial applications.Article Citation - WoS: 47Citation - Scopus: 57Arsenic Removal From Groundwater Using an Aerated Electrocoagulation Reactor With 3d Al Electrodes in the Presence of Anions(Elsevier, 2021) Gören, Ayşegül Yağmur; Kobya, MehmetCo-occurrence of arsenic and anions in groundwater causes a severe health problems and combine effects of these pollutants significantly affect performance of treatment process. Thus, this study has been conducted to examine the combine effects of anions on arsenic removal using aerated electrocoagulation (EC) reactor with 3D Al electrodes in groundwater. A 3-level, six factors Box-Behnken experimental design (BBD) was applied to investigate the individual and combine effect of anions and operating time: phosphate (x1: 1–10 mg L?1), silica (x2: 20–80 mg L?1), bicarbonate (x3: 130–670 mg L?1), fluoride (x4: 2–10 mg L?1), boron (x5: 5–10 mg L?1), and operating time (x6: 8–22 min) on desired responses. The specified responses were effluent arsenic concentration (Cf,As), removal efficiency of arsenic (Re), consumptions of energy and electrode (ENC and ELC), operational cost (OC), and adsorption capacity (qe). The optimum operating parameters predicted using BBD were found to be x1: 1.0 mg L?1, x2: 26.0 mg L?1, x3: 651.5 mg L?1, x4: 2.0 mg L?1, x5: 9.9 mg L?1, and x6: 10.5 min considering highest removal efficiency of arsenic and lowest operational cost. Under these operating conditions, the experimental values of Cf,As, Re, ENC, ELC, OC, and qe were found to be 2.82 ?g L?1, 98.6%, 0.411 kWh m?3, 0.0124 kg m?3, 0.098 $ m?3, and 17.65 ?g As (mg Al)?1, respectively. Furthermore, mathematical modelling was conducted using quadratic regression model and response surface analysis was performed to understand the relationship between independent parameters and responses. © 2020 Elsevier LtdArticle Citation - WoS: 18Citation - Scopus: 22The Health Risk Associated With Chronic Diseases in Villages With High Arsenic Levels in Drinking Water Supplies(Springer Verlag, 2017) Gündüz, Orhan; Bakar, Coşkun; Şimşek, Celalettin; Baba, Alper; Elçi, Alper; Gürleyük, Hakan; Mutlu, Merdiye; Çakır, AyşeThis study is intended to compare and assess the distribution and possible causes of current chronic diseases in villages with high arsenic levels in drinking water supplies. It is a cross-sectional epidemiological research that analyzes the frequency and underlying risk factors of chronic diseases in villages with varying levels of arsenic exposure through drinking water. Sample space of study included 1003 individuals, 614 of whom were from villages with high arsenic levels in drinking water and remaining 389 were from two control villages with below-limit arsenic levels in drinking water. While nutritional habits and living environments of two groups were similar, cigarette smoking and alcohol use were higher in villages with low arsenic levels. Mini mental state examination test results in 60+ age group were lower in villages with high arsenic levels. Although no statistically significant differences were detected in chronic disease occurrence between the groups, the number of cases was higher in villages with higher percentage of cigarette smoking and alcohol use. Moreover, cases of lung, colon, and stomach cancers were higher in villages with high arsenic levels in drinking water supplies.Article Citation - WoS: 28Citation - Scopus: 29Arsenite and Arsenate Removals From Groundwater by Electrocoagulation Using Iron Ball Anodes: Influence of Operating Parameters(Elsevier Ltd., 2017) Şık, E.; Demirbaş, Erhan; Gören, Ayşegül Yağmur; Öncel, Mehmet Salim; Kobya, MehmetRemovals of arsenite (As(III)) and arsenate (As(V)) from groundwater by a cylindrical packed-bed electrocoagulation (EC) reactor using Fe ball anodes were investigated in this study. Effects of some operating parameters such as initial pH (pHi of 6.5–8.5), applied current (i of 0.075–0.30 A), initial concentration (Co of 30–200 μg/L), diameter of iron ball (dp of 5.0–10.0 mm), height of anode balls in the reactor (h of 2–8 cm) and airflow rate (Qair of 0.0–6.0 L/min) on the removal efficiency of arsenic were evaluated. The removal efficiency of arsenic decreased with increase in concentrations of arsenic from 30 to 200 μg/L while its removal efficiency increased with increase in operating time, applied current, height of anode in the reactor, and airflow rate. The optimum operating conditions for effective As(III) and As(V) removals to meet the permissible level of arsenic effluent concentration of <10 μg/L were determined as 0.3 A, 14 min of EC time for As(III) and 12 min for As(V), a pHi of 7.5, Co of 200 μg/L, dp of 7.5 mm, h of 7.5 cm and Qair of 6 L/min, respectively. Arsenic removal efficiency, energy and electrode consumptions, operating cost, charge loading and arsenic removed capacity per amount of electrochemically generated Fe at the optimum conditions were also calculated as 96.0%, 1.442 kWh/m3, 0.0752 kg/m3, 0.612 $/m3, 252 C and 2.55 μg/mg Fe (0.762 μg/C) for As(III) removal and 95.8%, 1.386 kWh/m3, 0.0628 kg/m3, 0.546 $/m3, 216 C and 3.05 μg/mg Fe (0.887 μg/C) for As(V) removal, respectively.Article Citation - WoS: 12Citation - Scopus: 12Oil Mound Spreading and Migration With Ambient Groundwater Flow in Coarse Porous Media(John Wiley and Sons Inc., 1996) Çorapçıoplu, M. Yavuz; Tuncay, Kağan; Ceylan, B. KağanWhen a light, immiscible oil leaks above an unconfined aquifer, it spreads and forms a floating mound on the table. The oil mound migrates in the direction of ambient ground flow. In this study we present a governing equation for the migrating mound thickness by averaging the oil phase mass balance equation. Analytical and numerical solutions to an advective- dispersive type equation are presented to estimate the temporal and spatial distribution of the migrating oil mound thickness for two problems of practical importance: formation, spreading, and migration of an oil mound on the table and spreading and migration of an established layer of oil with ambient ground flow. The model results compare favorably with test data obtained by laboratory flume experiments. Although the model has some simplifying assumptions such as the absence of capillary pressure gradients, sharp saturation changes across the phase interfaces, and single mobile phase (i.e., oil flow only), it can be useful as a screening or site assessment tool because of its relative simplicity.