WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/11147/7150

Browse

Search Results

Now showing 1 - 10 of 34
  • Article
    Citation - WoS: 17
    Citation - Scopus: 21
    Utilization of Stalk Waste Separated During Processing of Sun-Dried Figs (ficus Carica) as a Source of Pectin: Extraction and Determination of Molecular and Functional Properties
    (Academic Press Inc., 2022) Çavdaroğlu, Elif; Yemenicioğlu, Ahmet
    This study aimed the utilization of fig stalk waste as an alternative pectin source. For this purpose, the characteristics of extracted stalk waste pectin (SP) were compared with those of citrus pectin (CP) and pectin extracted from defected substandard whole sun-dried figs (FP). The SP had a higher extraction yield (11.7%) than FP (9.4%). The galacturonic acid content and degree of esterification of SP (32.3 and 50.1%) were higher than those of FP (19.9 and 38.8%), but lower than those of CP (79.3 and 56.2%), respectively. The SP and CP had different sugar compositions (D-glucose, L-rhamnose, D-galactose and L-arabinose) and weight average molecular weights, but similar FTIR profiles. The SP showed almost 1.9 and 1.6-fold higher Trolox equivalent antioxidant capacity (TEAC), and 2.7 and 2.0-fold higher water absorption capacity than CP and FP, respectively. SP at 3% (w/w) showed the second highest viscosity after CP and the highest emulsion stability. Gels of SP and CP at 1.75–3% range had similar firmness, but SP formed more fracturable gels than CP. Sun-dried fig stalk waste is a better source of pectin than defected substandard whole sun-dried figs. The SP could be utilized to develop functional food with alternative textural and rheological properties.
  • Article
    Citation - WoS: 3
    Citation - Scopus: 3
    Reconstruction of Generalized Impedance Functions for 3d Acoustic Scattering
    (Academic Press Inc., 2019) Ivanyshyn Yaman, Olha
    We consider the inverse obstacle scattering problem of determining both of the surface impedance functions from far field measurements for a few incident plane waves at a fixed frequency. The reconstruction algorithm we propose is based on an iteratively regularized Newton-type method and nonlinear integral equations. The mathematical foundation of the method is presented and the feasibility is illustrated by numerical examples. (C) 2019 Elsevier Inc. All rights reserved.
  • Article
    Citation - WoS: 15
    Citation - Scopus: 16
    A Mode Shape Assembly Algorithm by Using Two Stage Bayesian Fast Fourier Transform Approach
    (Academic Press Inc., 2019) Hızal, Çağlayan; Turan, Gürsoy; Aktaş, Engin; Ceylan, Hasan
    Operational modal analysis may require identifying global modal shapes by using multiple setup measurements. For this purpose, various algorithms have been developed which make use of the Bayesian approach to estimate the global mode shapes. The main motivation of the available Bayesian approaches is based on the estimation of the optimal global mode shape vector directly from Fast Fourier Transform data or assembling the local mode shapes that are identified in the individual setups by using Gaussian approximation. In this study, the two-stage Bayesian Fast Fourier Transform Approach which is originally applied to single setups is implemented to multiple setup problems for well separated modes. Analytically it is shown that the resulting formulation is the same for the mode shape assembly by using the Gaussian approximation. In addition, the weights of individual setups in the global mode shape vector is analytically calculated which depend on the Hessian matrix for local mode shapes. To validate the proposed methodology, a numerical example that considers setup-to-setup variability of modal signal-noise ratios is presented. For comparison purposes a ten-story shear frame model is experimentally investigated, and the measurements of a benchmark bridge structure are considered in the verification of the current procedure. (C) 2019 Elsevier Ltd. All rights reserved.
  • Article
    Citation - WoS: 41
    Citation - Scopus: 43
    Chloride or Sulfate? Consequences for Ozonation of Textile Wastewater
    (Academic Press Inc., 2019) Öktem, Yalçın Aşkın; Yüzer, Burak; Aydın, Muhammed Iberia; Ökten, Hatice Eser; Meriç, Süreyya; Selçuk, Hüseyin
    Ozonation of chloride-rich textile wastewater is a common pretreatment practice in order to increase biodegradability and therefore meet the discharge limits. This study is the first to investigate ozone-chloride/bromide interactions and formation of hazardous adsorbable organic halogens (AOX) in real textile wastewater. Initially effect of ozonation on chloride-rich real textile wastewater samples were investigated for adsorbable organic halogens (AOX) formation, biodegradability and toxicity. After 15 min of ozonation, maximum levels of chlorine/bromine generation (0.3 mg/l) and AOX formation (399 mg/l) were reached. OUR and SOUR levels both increased by approximately 58%. Daphnia magna toxicity peaked at 100% for 10 min ozonated sample. Considering adverse effects of ozonation on chloride-rich textile industry effluents, we proposed replacement of NaCl with Na2SO4. Comparative ozonation experiments were carried out for both chloride and sulfate containing synthetic dyeing wastewater samples. Results showed that use of sulfate in reactive dyeing increased biodegradability and decreased acute toxicity. Although sulfate is preferred over chloride for more effective dyeing performance, the switch has been hampered due to sodium sulfate's higher unit cost. However, consideration of indirect costs such as contributions to biodegradability, toxicity, water and salt recovery shall facilitate textile industry's switch from chloride to sulfate.
  • Article
    Citation - WoS: 24
    Citation - Scopus: 35
    Physicochemical and Rheological Properties of Rice-Based Gluten-Free Blends Containing Differently Treated Chickpea Flours
    (Academic Press Inc., 2018) Kahraman, Gökçen; Harsa, Şebnem; Lucisano, Mara; Cappa, Carola
    This study focused on the evaluation of the physicochemical and rheological properties of chickpea flours and blends obtained by partially substituting rice flour (25 g/100 g) with raw, roasted and dehulled chickpea flour. The characteristics of the resultant doughs were evaluated. In comparison with rice flour, blends containing chickpea flours exhibited high protein and fat content, a reduced retrogradation tendency (setback values of 404–415 vs. 479 Brabender Unit) and a higher foaming capacity and stability, which can be beneficial for their use in baked food formulations. However, roasting decreased foaming capacity and stability. Even if the rheofermentographic test evidenced a slight reduction in dough development, high CO2 retention capacity (≥ 98%) and similar-to-lower leavening times were observed for doughs containing chickpea flours. Incorporating chickpea flours also caused an increase in the viscous and elastic moduli of rice-based doughs, resulting in a good structuring of the dough. The results of this study indicated that chickpea flours could be used as a healthy ingredient in gluten-free rice-based formulations.
  • Article
    Citation - WoS: 7
    Citation - Scopus: 9
    Analysis of a Novel Sensor Interrogation Technique Based on Fiber Cavity Ring-Down (crd) Loop and Otdr
    (Academic Press Inc., 2018) Yüksel, Kıvılcım; Yılmaz, Anıl
    We present the analysis of a remote sensor based on fiber Cavity Ring-Down (CRD) loop interrogated by an Optical Time Domain Reflectometer (OTDR) taking into account both practical limitations and the related signal processing. A commercial OTDR is used for both pulse generation and sensor output detection. This allows obtaining a compact and simple design for intensity-based sensor applications. This novel sensor interrogation approach is experimentally demonstrated by placing a variable attenuator inside the fiber loop that mimics a sensor head.
  • Article
    Citation - WoS: 12
    Citation - Scopus: 11
    Poor Modules With No Proper Poor Direct Summands
    (Academic Press Inc., 2018) Alizade, Rafail; Büyükaşık, Engin; López-Permouth, Sergio; Yang, Liu
    As a mean to provide intrinsic characterizations of poor modules, the notion of a pauper module is introduced. A module is a pauper if it is poor and has no proper poor direct summand. We show that not all rings have pauper modules and explore conditions for their existence. In addition, we ponder the role of paupers in the characterization of poor modules over those rings that do have them by considering two possible types of ubiquity: one according to which every poor module contains a pauper direct summand and a second one according to which every poor module contains a pauper as a pure submodule. The second condition holds for the ring of integers and is just as significant as the first one for Noetherian rings since, in that context, modules having poor pure submodules must themselves be poor. It is shown that the existence of paupers is equivalent to the Noetherian condition for rings with no middle class. As indecomposable poor modules are pauper, we study rings with no indecomposable right middle class (i.e. the ring whose indecomposable right modules are pauper or injective). We show that semiartinian V-rings satisfy this property and also that a commutative Noetherian ring R has no indecomposable middle class if and only if R is the direct product of finitely many fields and at most one ring of composition length 2. Structure theorems are also provided for rings without indecomposable middle class when the rings are Artinian serial or right Artinian. Rings for which not having an indecomposable middle class suffices not to have a middle class include commutative Noetherian and Artinian serial rings. The structure of poor modules is completely determined over commutative hereditary Noetherian rings. Pauper Abelian groups with torsion-free rank one are fully characterized.
  • Article
    Citation - WoS: 10
    Citation - Scopus: 12
    Statistical Approach To Tunneling Time in Attosecond Experiments
    (Academic Press Inc., 2017) Demir, Durmuş Ali; Güner, Tuğrul
    Tunneling, transport of particles through classically forbidden regions, is a pure quantum phenomenon. It governs numerous phenomena ranging from single-molecule electronics to donor–acceptor transition reactions. The main problem is the absence of a universal method to compute tunneling time. This problem has been attacked in various ways in the literature. Here, in the present work, we show that a statistical approach to the problem, motivated by the imaginary nature of time in the forbidden regions, lead to a novel tunneling time formula which is real and subluminal (in contrast to various known time definitions implying superluminal tunneling). In addition to this, we show explicitly that the entropic time formula is in good agreement with the tunneling time measurements in laser-driven He ionization. Moreover, it sets an accurate range for long-range electron transfer reactions. The entropic time formula is general enough to extend to the photon and phonon tunneling phenomena.
  • Book Part
    Citation - WoS: 4
    Citation - Scopus: 8
    Advances in Model-Based Testing of Graphical User Interfaces
    (Academic Press Inc., 2017) Belli, Fevzi; Beyazıt, Mutlu; Budnik, Christof J.; Tuğlular, Tuğkan
    Graphical user interfaces (GUIs) enable comfortable interactions of the computer-based systems with their environment. Large systems usually require complex GUIs, which are commonly fault prone and thus are to be carefully designed, implemented, and tested. As a thorough testing is not feasible, techniques are favored to test relevant features of the system under test that will be specifically modeled. This chapter summarizes, reviews, and exemplifies conventional and novel techniques for model-based GUI testing.
  • Article
    Mrna Decay Analysis in Drosophila Melanogaster: Drug-Induced Changes in Glutathione S-Transferase D21 Mrna Stability
    (Academic Press Inc., 2008) Akgül, Bünyamin; Tu, Chen-Pei D.
    We have established an in vivo system to investigate mechanisms by which pentobarbital (PB), a psychoactive drug with a sedative effect, changes the rate of decay of gstD21 mRNA (encoding a Drosophila glutathione S-transferase). Here we describe methods for the use of hsp70 promoter-based transgenes and transgenic lines to determine mRNA half-lives by RNase protection assays in Drosophila. We are able to identify and map putative decay intermediates by cRT-PCR and DNA sequencing of the resulting clones. Our results indicate that the 3′-UTR of gstD21 mRNA is responsive to PB by regulating mRNA decay and that the cis-acting element(s) responsible for the PB-mediated stabilization resides in a 59 nucleotide sequence in the 3′-UTR of the gstD21 mRNA (Akgül and Tu, 2007).