WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
5 results
Search Results
Now showing 1 - 5 of 5
Article Effective Synthesis of Cetyl Palmitate Over Co-Precipitated Wo3-Zro2 Catalysts(Springer Verlag, 2018) Mutlu, Vahide N.; Yılmaz, SelahattinThis study is focused on the development of solid acid catalysts for the synthesis of long chain fatty acids. A series of WO3-ZrO2 catalysts were prepared by co-precipitation method and tested in the synthesis of cetyl palmitate. The effect of WO3 loading (10, 15, and 20 wt% WO3) and calcination temperature (700 and 800 degrees C) on the catalyst properties and activity was investigated. XRD and Raman analysis confirmed that WO3 loading stabilized the tetragonal zirconia phase. Higher calcination temperature enhanced the acidities of the catalysts. WO3-ZrO2 catalysts were found to be very efficient for the synthesis of cetyl palmitate with high selectivity. These catalysts were tested for different reaction temperatures (135 and 162 degrees C), feed composition and catalyst amounts. The highest cetyl palmitate yield (98.4%) was obtained over the catalyst calcined at 800 degrees C with 15 wt% WO3, which had the highest total acidity. The catalysts preserved their activities up to three reuse.Article Citation - WoS: 11Citation - Scopus: 11Effect of Different Acidity Modifications on the Activity and Selectivity on H-Zsm5 Zeolites in N-Butene Isomerization(Springer Verlag, 2014) Kılıç, Emre; Yılmaz, SelahattinH-ZSM-5 was modified by silylation [tetraethylorthosilicate (TEOS) and triaminopropyltriethoxysilane], alkali (NaOH), acid (HCl) and ammoniumhexafluorosilicate (AHFS) treatments. The parent and modified zeolite forms were tested in n-butene isomerization. Modifications affected total acidities, the strength of the acid sites, pore sizes and surface areas of the H-ZSM-5 differently. The modifications decreased the conversion obtained by the parent catalyst. TEOS and alkali modifications did not promote formation of isobutene. Pre-alkali treatment before acid treatment increased selectivity to isobutene from 56.0 to 66.7 %, while conversion changed a little, it dropped from 52 to 50 %. AHFS modification provided the highest enhancement in selectivity to isobutene (87.5 %) for which n-butene conversion was dropped by about 10 % compared to H-ZSM-5. This was attributed to a slight modification of the pore size and to the reduction in strong and weak acid sites and generation of new Lewis acid sites.Conference Object Citation - WoS: 9Citation - Scopus: 24Modeling Leakage of Ephemeral Secrets in Tripartite/Group Key Exchange(Springer Verlag, 2010) Manulis, Mark; Suzuki, Koutarou; Ustaoğlu, BerkantRecent advances in the design and analysis of secure two-party key exchange (2KE) such as the leakage of ephemeral secrets used during the attacked sessions remained unnoticed by the current models for group key exchange (GKE). Focusing on a special case of GKE - the tripartite key exchange (3KE) - that allows for efficient one-round protocols, we demonstrate how to incorporate these advances to the multi-party setting. From this perspective our work closes the most pronounced gap between provably secure 2KE and GKE protocols. The proposed 3KE protocol is an implicitly authenticated protocol with one communication round which remains secure even in the event of ephemeral secret leakage. It also significantly improves upon currently known 3KE protocols, many of which are insecure. An optional key confirmation round can be added to our proposal to achieve the explicitly authenticated protocol variant. © 2010 Springer-Verlag.Article Citation - WoS: 23Citation - Scopus: 23Use of Polyethylene Glycol Coatings for Optical Fibre Humidity Sensing(Springer Verlag, 2008) Açıkgöz, Sabriye; Bilen, Bukem; Demir, Mustafa Muammer; Menceloğlu, Yusuf Z.; Skarlatos, Yani; Aktaş, Gülen; İnci, Mehmet N.Humidity induced change in the refractive index and thickness of the polyethylene glycol (PEG) coatings are in situ investigated for a range from 10 to 95%, using an optical waveguide spectroscopic technique. It is experimentally demonstrated that, upon humidity change, the optical and swelling characteristics of the PEG coatings can be employed to build a plastic fibre optic humidity sensor. The sensing mechanism is based on the humidity induced change in the refractive index of the PEG film, which is directly coated onto a polished segment of a plastic optical fibre with dip-coating method. It is observed that PEG, which is a highly hydrophilic material, shows no monotonic linear response to humidity but gives different characteristics for various ranges of humidity levels both in index of refraction and in thickness. It undergoes a physical phase change from a semi-crystalline structure to a gel one at around 80% relative humidity. At this phase change point, a drastic decrease occurs in the index of refraction as well as a drastic increase in the swelling of the PEG film. In addition, PEG coatings are hydrogenated in a vacuum chamber. It is observed that the hydrogen has a preventing effect on the humidity induced phase change in PEG coatings. Finally, the possibility of using PEG coatings in construction of a real plastic fibre optic humidity sensor is discussed.Article Citation - WoS: 14Citation - Scopus: 14The Circuit Implementation of a Wavelet Function Approximator(Springer Verlag, 2002) Özkurt, Nalan; Savacı, Ferit Acar; Gündüzalp, MustafaThis paper describes the analog synthesis of a wavelet function approximator using sigmoidal mother wavelet. Any finite energy multivariate function can be approximated by this analog circuit using the multiresolution approximation property of the wavelet decomposition. The approximator circuit includes bipolar junction transistors, operational amplifiers and linear passive circuit elements.