Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/11147/7148

Browse

Search Results

Now showing 1 - 10 of 13
  • Article
    Citation - WoS: 1
    Citation - Scopus: 2
    Recycling of Gas-To Sludge as a Potential Organic Amendment: Effect on Soil and Cotton Properties Under Hyperarid Conditions
    (Academic Press, 2023) Mabrouk, O.; Hamdi, H.; Sayadi, S.; Al-Ghouti, M.A.; Abu-Dieyeh, M.; Kogbara, R.; Al-Sharshani, A.
    Gas-to-liquid (GTL) sludge is a specific wastewater treatment by-product, which is generated during the industrial process of natural gas conversion to transportation fuels. This least studied sludge is pathogen-free and rich in organic carbon and plant nutrients. Therefore, it can be reused for soil enhancement as a sustainable management strategy to mitigate landfill gas emissions. In this field study, we compared the performance of soil treatments with GTL sludge to the more conventional chemical fertilizers and cow manure compost for the cultivation of cotton under hyperarid conditions. After a complete growing season, GTL sludge application resulted in the enhancement of soil properties and plant growth compared to conventional inputs. As such, there was a significant dose-dependent increase of soil organic matter (4.01% and 4.54%), phosphorus (534 and 1090 mg kg−1), and cumulative lint yield (4.68 and 5.67 t ha−1) for GTL sludge application rates of 1.5% and 3%, respectively. The produced fiber quality was adequate for an upland cotton variety (Gossypium hirsutum var. MAY 344) and appeared more dependent on the prevailing climate conditions than soil treatments. On the other hand, the adverse effects generally related to industrial sludge reuse were not significant and did not affect the designed agro-environmental system. Accordingly, plants grown on GTL sludge-amended soils showed lower antioxidant activity despite significant salinity increase. In addition, the concentrations of detected heavy metals in soil were within the standards’ limits, which did not pose environmental issues under the described experimental conditions. Leachate analysis revealed no risks for groundwater contamination with phytotoxic metals, which were mostly retained by the soil matrix. Therefore, recycling GTL sludge as an organic amendment can be a sustainable solution to improve soil quality and lower carbon footprint. To reduce any environmental concerns, an application rate of 1.5% could be provisionally recommended since a two-fold increase in sludge dose did not result in a significant yield improvement. © 2023 Elsevier Ltd
  • Conference Object
    Preventing Urban Floods by Optimized Modeling: a Comparative Evaluation of Alternatives in İzmir (türkiye)
    (Springer Science and Business Media Deutschland GmbH, 2023) Arslan, Bertan; Salata, Stefano
    It is widely acknowledged that coastal cities will be heavily threatened by climate change globally. Among these cities, the Mediterranean suffers from a coupled dynamic of sea level rise and pluvial flooding due to their landform and soil characteristics. In this situation, analyzing the morphological and hydrological characteristics to define vulnerable areas is a prerequisite to designing performance-based solutions. But how does the flood vulnerability change with the different configurations of pervious and impervious surfaces? How do soil and landform characteristics affect flood vulnerability? This study assumes the possibility of re-naturing the coastal neighborhood of Karsiyaka, Izmir (Türkiye) while using fifteen alternative scenarios. We modeled the Urban Flood Risk Mitigation using InVEST (Natural Capital Project) and integrated the results with an analysis of the flow accumulation. According to our results, when the de-sealing process occurs in soils with low hydraulic conductibility, the results in terms of run-off containment can be dramatically limited or non-perceptible. The findings demonstrate that modeling with scenarios can guide the decision-makers while understanding exactly where the de-permeabilization can achieve its maximum efficiency. Therefore, performance-based solutions designed to increase water infiltration should carefully consider ex-ante empirical modeling to prevent urban flooding. © 2023, The Author(s), under exclusive license to Springer Nature Switzerland AG.
  • Article
    Citation - WoS: 4
    Citation - Scopus: 5
    Radiological Modeling of the Impacts of the Chernobyl Nuclear Power Plant Accident on Turkey and Southwest Asia
    (Elsevier, 2022) Bilgiç, Efem; Gündüz, Orhan
    Many studies investigated the impacts of the Chernobyl Nuclear Power Plant accident on Europe. However, majority of these have spatially excluded the highly populated southeast region of Chernobyl, including countries such as Turkey, Armenia, Georgia and Iran. In this study, a comprehensive environmental and radiological analysis were conducted particularly for this region. For this purpose, atmospheric dispersion and ground deposition of radionuclides were estimated using a Lagrangian particle dispersion model, FLEXPART. Totally, six simulations were conducted and model results were validated with measurements from Europe and Turkey. Furthermore, total effective dose equivalent (TEDE) values were estimated for adults and infants using the most current dose conversion factors of ICRP. Highest deposition of 137Cs were found in around Eastern Black Sea areas (10–40 kBq/m2). Similar values were found in some locations of Armenia and Azerbaijan under some scenarios, but country averages of 137Cs deposition were lower than 10 kBq/m2 for both countries. No significant depositions were found in southwest Iran, but relatively higher depositions (2–10 kBq/m2) of 137Cs were estimated along the Turkish border. Although there were slightly higher values in northern areas of Syria, Iraq, Lebanon and Cyprus, 137Cs depositions were mostly less than 2 kBq/m2. The 1-year TEDE value was calculated less than 1 mSv throughout the model domain except for some regions of eastern Black Sea. Highest values in lifetime dose values were calculated along the Black Sea coasts of Turkey and Georgia. Overall, infants were affected more from ionizing radiation compared to adults in this region.
  • Article
    Citation - WoS: 32
    Citation - Scopus: 36
    A Review of Boron Removal From Aqueous Solution Using Carbon-Based Materials: an Assessment of Health Risks
    (Elsevier, 2022) Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Karagündüz, Ahmet; Khataee, Alireza; Yoon, Yeojoon
    Carbon-based compounds have gained attention of researchers for use in boron removal due to their properties, which make them a viable and low cost adsorbent with a high availability, as well as environmental friendliness and high removal efficiency. The removal of boron utilizing carbon-based materials, including activated carbon (AC), graphene oxide (GO), and carbon nanotubes (CNTs), is extensively reviewed in this paper. The effects of the operating conditions, kinetics, isotherm models, and removal methods are also elaborated. The impact of the modification of the lifetime of carbon-based materials has also been explored. Compared to unmodified carbon based materials, modified materials have a significantly higher boron adsorption capability. It has been observed that adding various elements to carbon-based materials improves their surface area, functional groups, and pore volume. Tartaric acid, one of these doped elements, has been employed to successfully improve the boron removal and adsorption capabilities of materials. An assessment of the health risk posed to humans by boron in treated water utilizing carbon-based materials was performed to better understand the performance of materials in real-world applications. Furthermore, the boron removal effectiveness of carbon-based materials was evalu ated, as well as any shortcomings, future perspectives, and gaps in the literature.
  • Article
    Citation - WoS: 18
    Citation - Scopus: 21
    Fine and Coarse Particulate Matter, Trace Element Content, and Associated Health Risks Considering Respiratory Deposition for Ergene Basin, Thrace
    (Elsevier, 2021) Can Terzi, Begüm; Fıçıcı, Merve; Tecer, Lokman Hakan; Sofuoğlu, Sait Cemil
    Ergene Basin is located in Thrace, Turkey, where industries are densely populated. This study aimed to determine exposure of people living in Ergene Basin (Corlu and Cerkezkoy) to fine and coarse PM, and its potentially toxic element (PTE) content by considering variation in respiratory airway deposition rates with daily activities and PM particle size by employing deposition models of International Commission on Radiological Protection and Multiple Path Particle Dosimetry. Fine and coarse PM samples were collected daily for a year at points in Corlu and Cerkezkoy representing urban and industrial settings, respectively. A questionnaire survey was conducted in the study area to obtain time-activity budgets, and associated variation was included in the health risk assessment by considering time-activity-dependent inhalation rates. The studied PTEs were Al, As, Ba, Cd, Cr, Co, Mn, Ni, Pb, and Se. The mean fine and coarse PM concentrations were measured as 23 and 14 mu g/m(3) in Corlu, and 22 and 12 mu g/m(3) in Cerkezkoy, respectively. The only PTE that exceeded acceptable risk in terms of total carcinogenic risk was Cr. Non-carcinogenic risks of all the PTEs including Cr were below the threshold. The use of deposition fractions in the health risk assessment (HRA) calculations was found to prevent overestimation of health risks by at least 91% and 87% for fine and coarse PM, respectively, compared to the regular HRA. Minor differences in risk between Corlu and Cerkezkoy suggest that urban pollution sources could be at least as influential on human health as industrial sources. (C) 2020 Elsevier B.V. All rights reserved.
  • Article
    Citation - WoS: 37
    Citation - Scopus: 40
    Arsenite Removal From Groundwater by Aerated Electrocoagulation Reactor With Al Ball Electrodes: Human Health Risk Assessment
    (Elsevier, 2020) Gören, Ayşegül Yağmur; Kobya, Mehmet; Öncel, Mehmet Salim
    The application of conventional electrocoagulation (EC) process for removal of As(III) from groundwater suffers from the need of external oxidation agent for oxidation of As(III) to As(V). To tackle this limitation, an aerated EC reactor for the removal of As(III) from groundwater was evaluated in this study. The effect of initial pH(i), air flow rate, applied current, and electrode height in the EC reactor was examined. The experimental results showed that removal of arsenic mostly dependent on the applied current, electrode height in EC reactor, and air flow rate. The As(III) removal efficiency (99.2%) was maximum at pH(i) of 7.5, air flow rate of 6 L min(-1), applied current of 0.30 A, and electrode height in EC reactor of 5 cm, with an total operating cost of 0.583 $ m(-3). Furthermore, the carcinogenic risk (CR) and non-carcinogenic risk of arsenic (As) was in the range of tolerable limits at all operating conditions except applied current of 0.075 A at the end of the aerated EC process to remove As from groundwater. The present EC reactor process is able to remove As(III) from groundwater to below 10 mu g L-1, which is maximum contaminant level of arsenic in drinking water according to the World Health Organization (WHO). (C) 2020 Elsevier Ltd. All rights reserved.
  • Article
    Citation - WoS: 2
    Citation - Scopus: 2
    A Deterministic and Stochastic Assessment for Exposure and Risk of Arsenic Via Ingestion of Edible Crops
    (Springer Verlag, 2019) Can Terzi, Begüm; Gündüz, Orhan; Sofuoğlu, Sait Cemil
    Natural arsenic contamination is a critical problem for various places around the world. Simav Plain (Kutahya, Turkey) is one such area that was shown to have natural arsenic contamination in its waters and soils. Arsenic exposure through ingestion of edible crops cultivated in Simav Plain and associated health risks were assessed in this study. To achieve this objective, arsenic levels in 18 crop species were estimated based on measured soil arsenic concentrations. Individual and aggregate non-carcinogenic and carcinogenic risks associated with ingestion of arsenic-contaminated crops were then assessed with scenario-based deterministic point estimates and stochastic population estimates. Monte Carlo simulation was used for the estimation of population health risks. Accordingly, wheat was found as the highest-ranked crop specie for the both types of health risks, followed by tomato and potato, which are three of the most consumed crops in the region. The risk levels estimated in this study were relatively high, indicating consumption of crops grown in the plain may be posing significant health risks even at lower-bound estimates. Consuming wheat, tomato, potato, and their products from uncontaminated sources was found to reduce the aggregate risks up to 88% implicating the importance of proposing suitable management measures for similar risk-prone areas.
  • Conference Object
    Microbiological Risk Assessment and Preventive Actions in Bakery and Beverage Industries in Estonia, Slovenia and Turkey
    (Technical Research Center of Finland, 2008) Baş, Duygu; Baysal, Ayşe Handan; Ehavald, Helen; Eroğlu, Erdal; Filip, Sebastjan; Köksal, Fatma; Marin, Monika; Perne, Gregor; Türetgen, İrfan; Weiss, Martina; Akdoğan, Günay; Veskus, Tiina
    Risks from microbiological hazards are of immediate and serious concern to human health. Microbiological Risk Analysis (MRA) is a process consisting of three components: risk assessment (RA), risk management (RM), and risk communication (RC), which have the overall objective to ensure public health protection. The MRA process should include quantitative information to the greatest extent possible in the estimation of risk. A MRA should be conducted using a structured approach. Since MRA is a developing science, implementation of the guidelines may require a period of time and may also require specialized training in the countries that consider it necessary. This may be particularly the case for developing countries. This document deals with risk assessment, which is a key element in assuring that sound science is used to establish standards, guidelines and other recommendations for bakery and beverage safety to enhance consumer protection and facilitate international trade. This document will be of primary interest to governmental and research organizations, companies, and other interested parties who need to prepare a MRA will find it valuable.
  • Conference Object
    Risk Assessment in Miscellaneous Food Processing Industries Including Producers of Vegetables and Spices
    (Technical Research Center of Finland, 2008) Güldaş, Metin; Ursu, Roxana; Lagouri, Vasiliki; Kısıkkaya, N. Aslı; Uyar, M. Fatih; Mokorel, Primoz; Türe, Hasan; Lee, Solmaz; Korel, Figen; Karpiskova, Renata
    Testing foods for pathogenic and spoilage bacteria is the cornerstone to ensuring a safe and wholesome food supply. The methods for monitoring of microbial contamination are based on the following principles: → Cultivation of microbes in the presence of different energy sources, → Analysis of their macromolecular composition and their metabolic byproducts, → Use of specific immunological reagents for bacterial classification and identification.
  • Article
    Citation - WoS: 29
    Citation - Scopus: 39
    Investigation of Indoor Microclimate of Historic Libraries for Preventive Conservation of Manuscripts. Case Study: Tire Necip Paşa Library, Izmir-Turkey
    (Elsevier Ltd., 2017) Şahin, Cem Doğan; Çoşkun, Turgay; Durmuş Arsan, Zeynep; Gökçen Akkurt, Gülden
    Conservation of library collections requires an interdisciplinary approach. Dealing with the agents of deterioration via curative and preventive conservation methods has become a significant goal with new standards and norms in recent years. Preventive conservation aims indirect physical interventions such as climate control, good housekeeping and pest management. The aim of this study is to assess the degradation potential of indoor climate on valuable manuscripts that date back to 12th century, in a historic library in Tire-İzmir, Turkey. Through the study, first the library, namely Necip Paşa Library was continuously monitored by measurements of thermo-hygrometric parameters for one year. Then, the measured data were evaluated for the risk assessment based on the control classes of ASHRAE Chapter 21 to evaluate the mechanical, chemical and biological degradation risks. Finally, the conservation-oriented measures were proposed in order to keep the manuscripts under the better conditions. Results suggest that introducing a heating, ventilation and air-conditioning system to the building should be considered as the last option since natural hygrothermal behavior of the library gives reasonably sufficient evidences to prevent the manuscripts from degradations to some extent. Therefore, passive solutions should be given higher priorities not to disturb environmental past of the historic library.